Rocketfish RF-RBWHP01 User Manual (English) - Page 18

Establishing communication, Turning on the system - rocketboost headphones

Page 18 highlights

• The docking station charging indicator turns red to indicate the headphones are charging. • When the headphones are fully charged (which takes about eight to nine hours), the docking station charging indicator turns green. Note: It can take about eight to nine hours to charge the batteries. The batteries will last up to ten hours with continuous use (depending on the headphone volume level and distance from the docking station or other Rocketboost sender). Note: The headphones can be charged even if the docking station or headphones are turned off. Establishing communication Rocketboost products form an audio network and each Rocketboost receiver can select the audio from any Rocketboost sender in the network Every Rocketboost network must contain one hub device, which helps devices join the network. The network can have only one hub, which you can enable using the hub switch on the back of all Rocketboost senders and sender/receivers. If this is your first Rocketboost product, you should make the docking station sender device the hub, if you already have Rocketboost products, you should disable hub mode on this device. Important: Hub devices must always have power for your network to operate. The hub device can be in standby (power saving) mode, but must stay plugged in. Turning on the system To turn on the system: Note: The headphones and docking station were previously joined at the factory. When an active link is established between them, the power indicators on the headphones and docking station all light steadily. 1 Set the POWER switch on the left earpiece of headphones to ON. The power indicator turns: • Green when the HUB switch on the docking station is set to ENABLE. • Blue when the HUB switch on the docking station is set to DISABLE. 2 Press the POWER button on the docking station. The power indicator turns: • Green when the HUB switch on the docking station is set to ENABLE. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

18
The docking station charging indicator turns red to indicate the
headphones are charging.
When the headphones are fully charged (which takes about eight to
nine hours), the docking station charging indicator turns green.
Note:
It can take about eight to nine hours to charge the batteries. The batteries will
last up to ten hours with continuous use (depending on the headphone volume level
and distance from the docking station or other Rocketboost sender).
Note:
The headphones can be charged even if the docking station or headphones
are turned off.
Establishing communication
Rocketboost products form an audio network and each Rocketboost
receiver can select the audio from any Rocketboost sender in the
network
Every Rocketboost network must contain one hub device, which
helps devices join the network. The network can have only one hub,
which you can enable using the hub switch on the back of all
Rocketboost senders and sender/receivers. If this is your first
Rocketboost product, you should make the docking station sender
device the hub, if you already have Rocketboost products, you should
disable hub mode on this device.
Important
: Hub devices must always have power for your network to operate. The hub
device can be in standby (power saving) mode, but must stay plugged in.
Turning on the system
To turn on the system:
Note
: The headphones and docking station were previously joined at the factory.
When an active link is established between them, the power indicators on the
headphones and docking station all light steadily.
1
Set the
POWER
switch on the left earpiece of headphones to
ON
. The
power indicator turns:
Green when the
HUB
switch on the docking station is set to
ENABLE
.
Blue when the
HUB
switch on the docking station is set to
DISABLE
.
2
Press the
POWER
button on the docking station. The power indicator
turns:
Green when the
HUB
switch on the docking station is set to
ENABLE
.