Rocketfish RF-WSW312 User Manual (English) - Page 14
To listen to the subwoofer audio
View all Rocketfish RF-WSW312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1 Wireless Sender - Press and hold the pairing button for more than two seconds, then release it. The Wireless Sender enters pairing mode. 2 Wireless Receiver - Press and hold the pairing button for more than two seconds, then release it. The Wireless Receiver enters pairing mode. The Wireless Sender and Wireless Receiver will be paired within 10 seconds and will reconnect automatically if turned off and on. • Standby mode • The system will go into standby mode if no audio input signal is detected for more than five minutes. The LED indicators on the Wireless Sender and Wireless Receiver turn from blue to red. • Input signal auto selection • On the Wireless Receiver, the subwoofer input signal is always used when available. When the subwoofer input signal is unavailable for 15 seconds, and stereo input is available, the stereo input will be used. To listen to the subwoofer audio: 1 Power on the system. Make sure that the Wireless Sender and Wireless Receiver are paired. 2 Turn on your amplifier, then play the audio or video source through your amplifier. 14