Ryobi A18MS01 English Manual - Page 3

SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current no No Load Speed Class II Construction Rotational speed, at no load Double-insulated construction .../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Always wear safety goggles, safety glasses with side shields, or a full face shield when operating this product. Safety Alert No Hands Symbol Precautions that involve your safety. Failure to keep your hands away from the blade will result in serious personal injury. No Hands Symbol Pinch Point No Hands Symbol Failure to keep your hands away from the blade will result in serious personal injury. To reduce the risk of injury or damage, avoid contact with any pinch point. Failure to keep your hands away from the blade will result in serious personal injury. Hot Surface To reduce the risk of injury or damage, avoid contact with any hot surface. 3