Ryobi A18MS01 English Manual - Page 7
Miter Saw, Saw Mounting, Bracket, Carriage Bolt, Flat Washer, Mounting, Surface, Lock Washer
View all Ryobi A18MS01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY NUT LOCK WASHER flat WASHER MITER SAW SAW MOUNTing BRACKET 2 x 4 SLOT CARRIAGE BOLT Fig. 6 n Install carriage bolts as previously described. n After making sure both brackets are parallel to each other, finger tighten all four nuts to hold in position. If the saw has holes that do not line up with the slots in the saw mounting brackets: n Unplug the saw and lock saw arm in the down p osition. n Mount the saw to a mounting surface at least 1/2 in. thick using 5/16 hex head screws, washers, and nuts (not included). n Drill holes in the mounting surface to match the slots in the saw mounting brackets. n Proceed with installation as previously described. NUT LOCK WASHER flat WASHER NUT LOCK WASHER flat WASHER SAW MOUNTING BRACKET MITER SAW SLOT MOUNTING SURFACE CARRIAGE BOLT 7 Fig. 7