Ryobi CSB124 Operation Manual - Page 9

FEATURES PRODUCT SPECIFICATIONS Blade Diameter 7-1/4 in. Blade Arbor 5/8 in. Cutting Depth at 0 2-7/16 in. Cutting Depth at 45 1-7/8 in. Cutting Depth at 51.5 1-11/16 in. No Load Speed 5,000 r/min. (RPM) Input 120 V, AC only, 60 Hz, 12 Amps Net Weight 7.0 lbs. KNOW YOUR CIRCULAR SAW See Figure 1, page 17. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting.Before use of this product, familiarize yourself with all operating features and safety rules. BLADE WRENCH STORAGE Convenient wrench storage for quick blade changes. DUST CHUTE To direct saw dust and chips away from the operator, a dust chute is located on the side of the upper blade guard. ERGONOMIC DESIGN The design of your circular saw provides for maintaining proper two hand control when cutting. It has been designed to be comfortable and easy to grasp. SPINDLE LOCK The spindle lock allows you to secure the blade when turning the blade screw. NOTE: Do not run circular saw with spindle lock engaged. SWITCH Your circular saw is equipped with a pre-travel switch which reduces the possibility of accidental starting. When you depress the switch, the saw will not start until you reach the pre-travel position. You must depress the switch fully to activate the saw. ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Circular Saw 7-1/4 in. Blade Blade Wrench Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. 9 - English