Ryobi DP121L English Manual - Page 21
Adjustments
View all Ryobi DP121L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
adjustments WARNING: Before performing any adjustment, make sure the tool is unplugged from the power supply. Failure to heed this warning could result in serious personal injury. adjusting table height See Figure 22. Hold the table with one hand and loosen the table lock handle. Rotate the table adjustment handle clockwise to raise the table. Rotate the table adjustment handle counterclockwise to lower the table. Position the table to the desired height and retighten the table lock handle. adjusting Table bevel See Figure 23. The drill press is equipped with a tilting table that allows you to drill angled holes. The table can be tilted left or right, from 0º to 45º. To tilt the table: Loosen the large hex bolt located underneath the table. Use the bevel scale to tilt the table to the desired angle. Retighten the hex bolt securely. adjusting the drilling depth See Figure 24. To adjust the drilling depth when you need to drill a number of holes to exactly the same depth: Loosen the lock knob and the spindle lock lever. Rotate depth gauge to the desired setting. Retighten the lock knob securely using the hex key, if needed. table adjustment handle bevel scale table lock handle Fig. 22 hex bolt Fig. 23 depth gauge 21 lock knob Fig. 24