Ryobi P2090 Operation Manual - Page 12

TROUBLESHOOTING PROBLEM Line will not advance POSSIBLE CAUSE Line is welded to itself. Not enough line on spool. Line is worn too short. Line is tangled on spool. Grass wraps around boom housing and string head Cutting tall grass at ground level. Motor fails to start when switch Battery is not secure. trigger is depressed Battery is not charged. Shaft not connected completely. SOLUTION Lubricate with silicone spray. Install more line. Refer to Line Replacement earlier in this manual. Pull lines while alternately pressing down on and releasing bump knob. Remove line from spool and rewind. Refer to Line Replacement earlier in this manual. Cut tall grass from the top down to prevent wrapping. To secure the battery pack, make sure the latch on the bottom of the battery pack is snapped into place. Charge the battery pack according to the instructions included with your model. Make sure shaft trimmer is securely seated in the coupler on the power head. CALL US FIRST For any questions about operating or maintaining your product, call the RYOBI Help Line! Your product has been fully tested prior to shipment to ensure your complete satisfaction. This product has a Three-year Limited Warranty for personal, family, or household use (90 days for business or commercial use). For warranty details, visit www.ryobitools.com or call (toll free) 1-800-860-4050. 10 - English