Ryobi P521 English Manual - Page 8

FEATURES PRODUCT SPECIFICATIONS Length of Stroke 3/4 in. Strokes Per Minute 0-2,100 r/min. (RPM) Switch Variable Speed Cutting Angle 0° to 45° (Left and Right) Orbital Motion 4 Settings Charger Input 120 Volts, 60 Hz, AC only Charger Voltage 18 Volt Charge Rate 1 Hour HEX KEY LOCK-OFF BUTTON HEX KEY STORAGE SWITCH TRIGGER BLADE STORAGE TOOLLESS BLADE CLAMP T-SHANK SAW BLADE ORBITAL ADJUSTMENT KNOB Fig. 1 KNOW YOUR JIG SAW See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BLADE STORAGE When not in use, you can place the blades provided with your orbital jig saw in the storage compartment located on the back of the saw. HEX KEY STORAGE When not using the hex key included with your jig saw, you may place it in the convenient storage area on the base. LOCK-OFF BUTTON Your saw is equipped with a lock-off button which reduces the possibility of accidental starting. ORBITAL ADJUSTMENT KNOB Choose from four orbital adjustment positions for fine to aggressive cutting. TOOLLESS BLADE CLAMP Your saw has a blade clamp design that does not require the use of a blade wrench when installing or removing the blade. VARIABLE SPEED This tool has a variable speed switch that delivers higher speed with increased trigger pressure. 8