Ryobi RB101 English Manual - Page 13

TROUBLESHOOTING Problem Possible Cause Solution Wax does not go on evenly Polishing seems difficult Polisher does not turn on Too much wax on the bonnet Bonnet may be worn Bad connection to receptacle Problem with motor Bonnet surface is creased or wrinkled, Drawstring is loose resulting in uneven application/buffing Remove a portion of the wax and retry. Replace bonnet. Check to make sure plug is properly seated in outlet. If using an extension cord, check connection and wire gauge. Call your authorized service center. Untie drawstring and retighten. Pad spins slower than normal or not Motor needs to be serviced or Call your authorized service center. at all replaced 13