Ryobi RTS21 English Manual - Page 25
To Use The Sliding Table Extensions, To Use The Outfeed Support
View all Ryobi RTS21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
operation TO use the sliding table extensions See Figure 27. The sliding table extensions provide the operator with additional table width for supporting wider workpieces. This product has two: one on the left and one on the right side of the place. There are locking levers under both the front and back rails that lock the extensions in place or unlock the extensions for use. Pull the front table locking lever toward you to unlock the lever. Repeat with the back lever. Slide the table extension to the desired width. NOTE: Use the scale on the front rail when a specific width is desired. Once the extension tables are set to the desired width, relock the front and back locking levers by pushing the levers back towards the saw base. to use THE OUTFEED SUPPORT See Figure 28. The outfeed support slides to give the operator additional support for cutting long workpieces. With the table saw in the off position, stand behind the saw. Grasp the outfeed support with both hands and pull it until it is fully extended. table EXTENSION table EXTENSION LOCKING LEVER Fig. 27 OUTFEED SUPPORT Fig. 28 25