Ryobi RY29550 Operator's Manual - Page 9

SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. V A Hz W min no .../min Volts Amperes Hertz Watt Minutes Alternating Current Direct Current No Load Speed Class II Tool Per Minute Voltage Current Frequency (cycles per second) Power Time Type of current Type or a characteristic of current Rotational speed, at no load Double-insulated construction Revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read the Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Wear Eye and Hearing Protec- Wear eye protection which is marked to comply with ANSI Z87.1 as tion well as hearing protection when operating this equipment. Keep Bystanders Away Keep all bystanders at least 50 ft. away. Ricochet No Blade Gasoline and Lubricant Thrown objects can ricochet and result in personal injury or property damage. Do not install or use any type of blade on a product displaying this symbol. Use unleaded gasoline intended for motor vehicle use with an octane rating of 87 [(R + M) / 2] or higher. This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. 5 - English