Ryobi RY3716 Operation Manual - Page 10

FEATURES KNOW YOUR CHAIN SAW See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. CHOKE KNOB The choke knob opens and closes the choke valve in the carburetor. Positions available include FULL CHOKE, HALF CHOKE, and RUN. COMBINATION WRENCH A combination wrench tool is provided for use when performing various maintenance procedures. CHAIN BRAKE / FRONT HAND GUARD The chain brake is designed to quickly stop the chain from rotating. When the chain brake / front hand guard is pushed toward the bar, the chain should stop immediately. The chain brake does not prevent kickback. GUIDE BAR The factory-equipped guide bar has a small radius tip that offers somewhat lower kickback potential. LOW KICKBACK SAW CHAIN The low kickback saw chain helps minimize the force of a kickback reaction by preventing the cutters from digging in too deeply at the kickback zone. PRIMER BULB The primer bulb pumps fuel from the fuel tank to the car­buretor. SAFE-T-TIP™ ANTI-KICKBACK NOSE GUARD The SAFE-T-TIP™ Anti-Kickback Nose Guard is an attachment provided on the end of the guide bar to prevent the chain on the end of the guide bar from contacting the wood. THROTTLE TRIGGER The throttle trigger is used for starting the chain saw, and also for controlling chain rotation. ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled could result in serious personal injury. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Chain Saw Scabbard Combination Wrench 2-Cycle Engine Lubricant Operator's Manual Case (RY3716 only) Page 10 - English