Ryobi RY803100 User Manual - Page 9

SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning for safe operation of this product. SYMBOL NAME Toxic Fumes EXPLANATION Gas products emit carbon monoxide, an odorless, colorless, poison gas. Breathing carbon monoxide can cause nausea, fainting, or death. Kickback To reduce the risk of injury from kickback, hold the spray wand securely with both hands when the machine is on. Electric Shock Failure to use in dry conditions and to observe safe practices can result in electric shock. Chemical Burns To reduce the risk of injury or damage, DO NOT USE ACIDS, ALKALINES, BLEACHES, SOLVENTS, FLAMMABLE MATERIAL, OR INDUSTRIAL GRADE SOLUTIONS in this product. FEATURES PRODUCT SPECIFICATIONS Fuel Tank Capacity...0.31 gal. Maximum Pounds Per Square Inch Pressure*...2700 psi Maximum Gallons Per Minute*...2.3 gpm Maximum Inlet Water Temperature...104˚F *Max. rating determined by PWMA Standard 101 KNOW YOUR PRESSURE WASHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. AUTOMATIC SOAP INJECTION SYSTEM Place the soap injection hose with filter into your desired pressure washer detergent to apply detergent quickly and easily to your cleaning project. Use of the soap nozzle will activate the soap injector at a 20:1 dilution ratio. FUEL TANK This fuel tank has a maximum capacity of 0.31 gal. Use unleaded automotive gasoline in the engine. HOSE STORAGE Once the high pressure hose is rolled, hang it on the back of the machine using the stretch strap to secure in place. ON/OFF SWITCH The on/off switch is used in combination with the starter grip and rope to start the engine. It is also used to turn the engine off. STARTER GRIP AND ROPE The starter grip and rope is pulled to start the machine. THERMAL RELIEF VALVE This pump feature will prevent water temperatures from reaching harmful levels by releasing a small amount of water from a rubber hose. Once the water has drained, the thermal relief valve will reset itself. TRIGGER HANDLE The trigger handle has a gripping surface that provides added control of the spray wand and helps reduce fatigue. TRIGGER WITH LOCK OUT Pulling the trigger releases a stream of water for high ­pressure cleaning. The lock out provides protection against unauthorized use. Page 5 - English