Ryobi RYSWP25 Operation Manual - Page 8

FEATURES KNOW YOUR SWEEPER ATTACHMENT See Figure 1. The safe use of this product requires an understanding of the information on the product and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. PRODUCT SPECIFICATIONS Total Sweeping Width 15.25 in. Brush Length 6.5 in. Brush Diameter 10 in. ASSEMBLY UNPACKING This product requires assembly. n Carefully remove the items from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. n Inspect the product carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Sweeper Attachment J-Handle with Hardware Wheels Rotating Brushes Operator's Manual WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: Do not connect to power head until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. INSTALLING THE ROTATING BRUSHES See Figure 2.  Remove the hitch pins from the spindles at the front of the attachment.  Slide the rotating brushes onto the spindles.  Secure the brushes in place using the hitch pins. INSTALLING THE WHEELS See Figure 3. Wheels are provided to assist in moving the sweeper across the cleaning surfaces. The wheels can be removed when cleaning narrow spaces.  Remove the hitch pins and washers from the axles on the rear of the attachment.  Slide wheels onto the axles and reinstall the washers and hitch pins to secure. To remove:  Remove the hitch pins, and slide the wheels and washers off of the axles. 6 - English