Ryobi YN250FSD Operation Manual - Page 16

Warning, Clearing A Jammed Fastener

Get Ryobi YN250FSD PDF manuals and user guides View all Ryobi YN250FSD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

OPERATION WARNING: Disconnect the tool from the air supply before clearing a jammed fastener. Failure to do so could result in serious personal injury. CLEARING A JAMMED FASTENER See Figure 11. If a nail or fastener becomes jammed in the tool, disconnect the air hose and keep the tool pointed away from you while clearing the jam.  Disconnect the tool from the air supply.  Remove fasteners from the tool.  Pull up on the latch and open the jam release.  Insert a flat blade screwdriver into the driving mechanism and push the driver mechanism back, freeing the fastener jam.  Remove the bent fastener.  Close the jam release and latch.  Reconnect the tool to the air supply.  Reinstall fasteners. JAM RELEASE LATCH Fig. 11 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
16
OPERATION
WARNING:
Disconnect the tool from the air supply before clearing a
jammed fastener. Failure to do so could result in serious
personal injury.
CLEARING A JAMMED FASTENER
See Figure 11.
If a nail or fastener becomes jammed in the tool, disconnect
the air hose and keep the tool pointed away from you while
clearing the jam.
Disconnect the tool from the air supply.
Remove fasteners from the tool.
Pull up on the latch and open the jam release.
Insert a flat blade screwdriver into the driving mechanism
and push the driver mechanism back, freeing the fastener
jam.
Remove the bent fastener.
Close the jam release and latch.
Reconnect the tool to the air supply.
Reinstall fasteners.
LATCH
JAM
RELEASE
Fig. 11