Samsung 591S User Manual (user Manual) (ver.1.0) (English) - Page 98
PowerSaver, Preset Timing Modes, Less than 110W
View all Samsung 591S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Power Supply 90 ~ 264VAC rms, 60/50 Hz ± 3Hz Power Consumption Less than 110W Dimensions (WxDxH) 445 x 457.5 x 416 mm / 17.5 x 18.0 x 16.4 inch (After installation of Stand) Weight 18.2kg Environmental considerations Operating Temperature 32°F ~ 104°F(0°C ~ 40°C) Humidity 10% ~ 80%, non-condensing Storage Temperature -4°F ~113°F (-20°C ~ 45°C) Humidity 5% ~ 95%, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Note: Design and specifications are subject to change without prior notice. PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. State Power Indicator Power Consumption Normal Operation Green Less than 110W Power-off mode Green, Blinking Less than 1W Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.