Samsung BD-J5900 User Manual - Page 16

1111When finished, select Done at the right of the screen, and then press the v button. The player verifies the network connection and then connects to the network. 1111After the player verifies the network, select OK, and then press the v button. ĞĞ WPS(PBC) 111 In the Home screen, select Settings, and then press the v button. 222 Select Network, and then press the v button. 333 Select Network Settings, and then press the v button. 444 Select Wireless in the Network Settings screen, and then press the v button. 555 Press the ▲▼ button on your remote, and then press the ◀▶ button to select WPS(PBC). 666 Press the v button on your remote. The "Press the PBC button" message appears. 777 Press the WPS(PBC) button on your router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network. The Network Status screen appears. The player connects to the network after the network connection is verified. ĞĞ WPS(PIN) Before you begin, open the router's setup menu on your PC and access the screen with the WPS PIN entry field. 111 In the Home screen, select Settings, and then press the v button. 222 Select Network, and then press the v button. 333 Select Network Settings, and then press the v button. 444 Select Wireless in the Network Settings screen, and then press the v button. The player searches for and then displays a list of the available networks. 555 Select the desired network, and then press the ▶ button. 666 Select the WPS(PIN), and then press the v button. The PIN pop-up appears. 777 Enter the PIN into the WPS PIN entry field in the router's Set Up screen and then save the the screen. ✎✎ NOTES ■■ Contact the manufacturer of the router for instructions explaining how to access the router's Set Up screens or refer to the router's user's manual. ■■ For WPS connection, set your wireless router's security encryption to AES. WPS does not support WEP security encryption. Network Test Use this menu item to check whether your network connection is working or not. Network Status Use to check whether a connection to a network and the Internet has been established. Wi-Fi Direct The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the player and each other using a peerto-peer network, without a wireless router. ✎✎ NOTES ■■ Some Wi-Fi Direct devices may not support the DLNA function if connected via Wi-Fi Direct. If this is the case, we recommend that you change the network connection method you used to connect the devices. ■■ Bluetooth transmissions can interfere with the Wi-Fi Direct signal. Before you use the WiFi Direct function, we strongly recommend that you turn off the Bluetooth function of any active mobile device. 111 Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function. 222 In the Home screen, select Settings, and then press the v button. 333 Select Network, and then press the v button. 444 Select Wi-Fi Direct, and then press the v button. The Wi-Fi Direct devices that you can connect to the player appear. 555 You have three ways to complete the Wi-Fi connection: ●● Through the Wi-Fi device. ●● Through the player using PBC. ●● Through the player using a PIN. Each is covered below. Through the Wi-Fi Device 111 On the Wi-Fi device, follow the procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions. 222 When you have completed the procedure, you should see a popup on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the v button to accept. 333 The Connecting pop-up appears, followed by the Connected popup. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. 16