Samsung BDP1600 User Manual (ENGLISH) - Page 57

● SYSTEM UPgraDE  Do not use USB devices other than USB Flash Drives to do software upgrades using the USB Host jack.  There should be only one firmware upgrade file in USB flash drive for the player to properly perform an upgrade.  Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected. SYSTEM inFOrMaTiOn When the firmware upgrade is done, check the firmware details by following the steps below. 1. With the unit in Stop mode/No Disc mode, press the MEnU button. Music 2. Press the ▲▼ buttons to select Setup, then press the EnTEr or + button. Photo No disc Setup _ System ► Language Audio 3. Press the ▲▼ buttons to select System, then press the Display EnTEr or + button. HDMI Network Parental . Press the ▲▼ buttons to select System information, then press the EnTEr or + button. You can see detailed information about the current firmware. Music Photo No disc Setup System ◄ System Information ► Language Audio Display HDMI Network Parental Time Zone Clock Set Power On/Off sound : On Touch Key Sound : On BD Data Management System Update . Press the EnTEr button to select OK. System Setup menu will be displayed. Music Photo System Information No disc Setup System System Information ◄ ► LanguaSLgo/eWad:eXrX: XXXXXXXXXXXXTime Zone Audio Region : A/1 (BD/DVCDlo)ck Set DisplayESN : XXXX Power On/Off sound : HDMI Network OK Touch Key Sound : BD Data Management Parental System Update FirMWarE UPgraDE nOTiFiCaTiOn The popup menu appears when a newer version of the firmware is available from SAMSUNG update server than that of the Blu-ray Disc Player, if the Blu-ray Disc Player is connected to the network and powered on. • Yes : Select this to upgrade now. • no : Select this if you plan to upgrade later. System Update New Firmware is available. Do you want to update now? Yes No English _