Home » Samsung Manuals » Computer Monitors » Samsung C24B750X » Manual Viewer

Samsung C24B750X User Manual Ver.1.0 (English) - Page 25

Reinstall and Update, Connecting a PC to the Smart Station Monitor (Product)

Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Using Smart Station Reinstall and Update 1. Reinstall If the provided USB cable is connected again after a software program is removed, the removed program will be detected and a message will appear asking whether you want to reinstall the software. To reinstall, select "Yes" to proceed with installation. 2. Software installation using the provided CD If automatic installation is not supported or you want to reinstall the software manually, insert the provided CD into your PC and install. In this case, install the required software programs one after another. 3. Update If the provided CD is missing or the latest version driver is needed, download the latest driver from www.samsung.com. It is best to update your Smart Station monitor periodically to improve the performance. Connecting a PC to the Smart Station Monitor (Product) To use the product, you should connect it to a PC using the wireless-connection dongle or USB cable. You can listen to the sound by connecting an audio output device (headphones, etc.) to the [ ] port. (Audio is not supported when an HDMI-DVI cable is used to connect the product to the PC.) Series 5: HDMI mode ª USB mode ª MHL mode Series 7: HDMI mode ª USB mode ª Wireless Connection mode ª MHL mode When the product connects to a PC for the first time, the optimum resolution (1920 x 1080) will be selected automatically and the display will be set to extended mode. From the next time the product connects to the PC, a customized resolution will be applied. NOTE • W hen multiple display output ports on the PC are connected to the product at the same time, each display signal output depends on the system specifications of the PC. • W ireless Connection is supported on Series 7 only. 25

Section	Page
Chapter. 1	5
Before Using the Product	5
Copyright	5
Securing the Installation Space	6
Safety Precautions	6
Symbols	6
Cleaning	7
Electricity and Safety	7
Installation and Safety	8
Operation and Safety	9
Correct posture to use the product	12
Chapter. 2	13
Preparation	13
Unpacking the Smart Station	13
Removing the Packaging	13
Checking the Components	14
Parts	15
Front Buttons	15
Rear View	17
Side	17
Adjusting the Product Tilt	18
Chapter. 3	19
Using Smart Station	19
What is Smart Station?	19
Read the Following before Using the Wireless Connection / USB Hub Functions	20
Software Installation for Using Smart Station	21
Automatic installation when using a notebook PC	21
Automatic installation when using a desktop PC	23
Reinstall and Update	25
Connecting a PC to the Smart Station Monitor (Product)	25
Connecting to a PC Using the Wireless-connection Dongle - for Series 7 Only	26
Connecting to a PC Using a USB Cable	30
Monitor IP Setup	32
Dynamic IP	32
Static IP	33
What is Mobile Control?	35
Using Mobile Control (Sharing Your Keyboard/Mouse)	35
Chapter. 4	42
Using MHL	42
MHL (Mobile High-Definition Link)	42
Using MHL	43
Disabling MHL	44
Chapter. 5	45
Connecting and Using a Source Device	45
Checklist before Connecting to Source Devices	45
Pre-connection Checkpoints	45
Connecting the Power	45
Connecting and Using a PC	46
Connecting to a PC	46
Driver Installation	47
Setting Optimum Resolution	48
Changing the Resolution Using a PC	48
Connecting to a Video Device	50
Connecting to an Audio Output Device	50
Chapter. 6	51
Screen Setup	51
MAGIC	51
SAMSUNG MAGIC Bright	51
SAMSUNG MAGIC Color	52
Brightness	53
Configuring Brightness	53
Contrast	53
Configuring Contrast	53
Sharpness	54
Configuring Sharpness	54
Response Time	54
Configuring Response Time	54
HDMI Black Level	55
Configuring HDMI Black Level	55
Chapter. 7	56
Configuring the Tint Settings	56
Red	56
Configuring Red	56
Green	57
Configuring Green	57
Blue	57
Configuring Blue	57
Color Tone	58
Configuring Color Tone	58
Gamma	58
Configuring Gamma	58
Chapter. 8	59
Resizing or Relocating the Screen	59
Image Size	59
Configuring Image Size	59
H-Position	60
Configuring H-Position	60
V-Position	60
Configuring V-Position	60
Menu H-Position	61
Configuring Menu H-Position	61
Menu V-Position	61
Configuring Menu V-Position	61
Chapter. 9	62
Setup and Reset	62
HUB	62
Auto Wireless Detection - for Series 7 only	62
USB Super Charging	63
Select Source	63
Wireless ID - for Series 7 only	64
Eco Saving	64
Configuring Eco Saving	64
Menu Transparency	65
Configuring Menu Transparency	65
Language	65
Configuring Language	65
PC/AV Mode	66
Configuring PC/AV Mode	66
Auto Source	66
Configuring Auto Source	66
Display Time	67
Configuring Display Time	67
Key Repeat Time	67
Configuring Key Repeat Time	67
Off Timer On/Off	68
Configuring Off Timer On/Off	68
Off Timer Setting	68
Configuring Off Timer Setting	68
Reset	69
Restoring the default settings (Reset)	69
Chapter. 10	70
INFORMATION Menu and Others	70
INFORMATION	70
Viewing information (INFORMATION)	70
Configuring Brightness and Contrast in the Initial Screen	70
Configuring Volume in the Initial Screen	71
Configuring HUB in the Initial Screen	71
Chapter. 11	72
Troubleshooting Guide	72
Requirements Before Contacting Samsung Customer Service Center	72
Testing the Product	72
Checking the Resolution and Frequency	72
Check the following.	72
Troubleshooting Guide	74
The Wireless Connection screen - for Series 7 only	74
USB screen	74
Mobile Control and MHL	74
Q & A	75
Chapter. 12	77
Specifications	77
General	77
Wireless transmitter/receiver - for Series 7 only	78
PowerSaver	78
Preset Timing Modes	79
Specifications of the dongle that connects to a PC - for Series 7 only	79
Chapter. 13	80
Appendix	80
Contact SAMSUNG WORLD WIDE	80
Responsibility for the Pay Service (Cost to Customers)	84
Correct Disposal	85
Terminology	86
OSD(On Screen Display)	86
HUB	86
Wireless-connection dongle - for Series 7 only	86
Gamma	86
Grey scale	86
Scanning rate	86
Horizontal Frequency	86
Vertical Frequency	86
Resolution	87
Plug & Play	87

Match case Limit results 1 per page

Using Smart Station

Reinstall and Update

1. Reinstall

If the provided USB cable is connected again after a software program is removed, the

removed program will be detected and a message will appear asking whether you want to

reinstall the software.

To reinstall, select “

Yes

” to proceed with installation.

2. Software installation using the provided CD

If automatic installation is not supported or you want to reinstall the software manually,

insert the provided CD into your PC and install.

In this case, install the required software programs one after another.

3. Update

If the provided CD is missing or the latest version driver is needed, download the latest

driver from www.samsung.com.

It is best to update your Smart Station monitor periodically to improve the performance.

Connecting a PC to the Smart Station

Monitor (Product)

To use the product, you should connect it to a PC using the wireless-connection dongle or USB

cable.

You can listen to the sound by connecting an audio output device (headphones, etc.) to the

[

] port. (Audio is not supported when an HDMI-DVI cable is used to connect the product to

the PC.)

Series 5:

HDMI

mode

→

USB

mode

→

MHL

mode

Series 7:

HDMI

mode

→

USB

mode

→

Wireless Connection

mode

→

MHL

mode

When the product connects to a PC for the ﬁrst time, the optimum resolution (1920 x 1080)

will be selected automatically and the display will be set to extended mode. From the next

time the product connects to the PC, a customized resolution will be applied.

NOTE

•

When multiple display output ports on the PC are connected to the product at the same time, each

display signal output depends on the system speciﬁcations of the PC.

•

Wireless Connection

is supported on Series 7 only.