Samsung CLP 300 Service Manual - Page 90
Common Windows Problems, Fail To Print, A printer timeout - driver windows xp
UPC - 635753721041
View all Samsung CLP 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Troubleshooting 7.5 Common Windows Problems Problem "File in Use" message appears during installation. "Error Writing to LPTx" message appears. "General Protection Fault", "Exception OE", "Spool32", or "Illegal Operation" messages appear. Possible Cause and Solution Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer driver. Ensure that all cables are connected correctly and the printer is on. If bi-directional communication is not turned on in the driver, it will also cause this message. Close all other applications, reboot Windows and try printing again. "Fail To Print", "A printer timeout error occurred." messages appear. These messages may appear during printing. Just keep waiting until the printer finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. NOTE: Refer to the Microsoft Windows 98/Me/NT 4.0/2000/2003/XP User's Guide that came with your PC for further information on Windows error messages. 7.6 Common Macintosh Problems Problem Possible Cause and Solution The printer does not print a document from Acrobat Reader. You should change the Print Method option to Print as Image when you print from Acrobat Reader. The document has printed, but the print job has not disappeared from the spooler in Mac OS 10.3.2. Update your Mac OS to OS 10.3.3 or higher. Samsung Electronics Service Manual 7-11