Samsung CLP-325 User Guide - Page 76
Clearing paper jams, In the tray, Inside the machine, In the paper exit area
![]() |
View all Samsung CLP-325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
• Do not mix paper types in a tray. • Use only recommended print media ("Setting the paper size and type" on page 58). • Ensure that the recommended side of the print media is facing up in the tray. Clearing paper jams To avoid tearing the paper, pull the jammed paper out slowly and carefully. Follow the instructions in the following sections to clear the jam. If a paper jam occurs, the status LED on the control panel lights orange. Find and remove the jammed paper. If paper is jammed in the paper feed area, follow the next steps to release the jammed paper. In the tray Click this link to open an animation about clearing a jam. 1. Open and close the front cover. The jammed paper is automatically ejected from the machine. If the paper does not eject, go to the next step. 2. Pull out the tray. Inside the machine Click this link to open an animation about clearing a jam. The fuser area is hot. Be careful when removing paper form this area to prevent getting your fingers burnt. 1. Open and close the front cover. The jammed paper is automatically ejected from the machine. If the paper does not eject, go to the next step. 2. To remove the jammed paper, open the rear cover. 3. Carefully remove the jammed paper by pulling in the direction as shown below. Most of the jammed paper can be removed in this step. 3. Remove the jammed paper by gently pulling it straight out. If the paper does not eject when you pull, or if you do not see the paper in this area, check the fuser area around the toner cartridge (See "Inside the machine" on page 76). 4. Insert the tray back into the machine until it snaps into place. Printing automatically resumes. Do not touch the fuser inside the inner cover. It is hot and could cause burns. Be careful when removing paper from this area to prevent getting your fingers burnt. If the paper does not eject when you pull, or if you do not see the paper in this area, check the paper exit area (See "In the paper exit area" on page 76). 4. Close the rear cover. Make sure that it is securely closed. Printing automatically resumes. In the paper exit area Click this link to open an animation about clearing a jam. The fuser area is hot. Be careful when removing paper form this area to prevent getting your fingers burnt. Troubleshooting_ 76
![](/manual_guide/products/samsung-clp325-user-guide-95ba418/76.png)