Samsung CLX-6220 User Guide - Page 73

into a single image, processing of scanned books and watermark stamping. Click the Help button from the lower-left corner of the window and click on any option you want to know about. Then a pop up window appears with information about that option's feature which is provided from the Scan Assistant. Changing the scan feature settings Your machine provides you with the following setting options to allow you to customize your scan jobs. The settings you change will be maintained for a certain time, but after that period, the options will be reset to default values. • Scan Size: Sets the image size. • Original Type: Sets the original documents's type. • Resolution: Sets the image resolution. • Scan Color: Sets the color mode. • Scan Format: Sets the file format in which the image is to be saved. If you select TIFF or PDF, you can select to scan multiple pages. Depending on the selected scan type, this option may not appear. To customize the settings before starting a scan job: 1. Press (Scan/Email) on the control panel. 2. Press Menu on the control panel. 3. Press the up/down arrow to highlight Scan Feature and press OK. 4. Press the up/down until the scan type you want is highlighted and press OK. 5. Press the up/down until the scan setting option you want is highlighted and press OK. 6. Press the up/down arrow until the desired status highlights and press OK. 7. Repeat steps 5 and 6 to set other setting options. 8. When you have finished, press Stop/Clear to return to ready mode. Changing the default scan settings To avoid having to change the scan settings for each job, you can set up default scan settings for each scan type. 1. Press (Scan/Email) on the control panel. 2. Press Menu on the control panel. 3. Press the up/down arrow to highlight Scan Setup and press OK. 4. Press OK when Change Default highlights . 5. Press the up/down until the scan type you want is highlighted and press OK. 6. Press the up/down until the scan setting option you want is highlighted and press OK. 7. Press the up/down arrow until the desired status highlights and press OK. 8. Repeat steps 6 and 7 to set other setting options. 9. When you have finished, press Stop/Clear to return to ready mode. Scan on both sides of paper This is available only when you load originals into the document feeder. By using the Duplex button on your machine, you can set the machine to scan on both sides of paper. 1. Press (Scan/Email) on the control panel. 2. Place originals, face up, in the document feeder. Or you can use the scanner glass with a single original document face down and closed the scanner lid. 3. Press Duplex on the control panel. 4. Press the up/down arrow until the binding option you want is highlighted. •Off: Scans in normal mode. •2 Side: Scans on both sides of the original. •2->1Side ROT2: Scans on both sides of the original and prints each one on a separate sheet, but the information on the back side of the printout is rotated 180°. 5. Press OK to save your selection. Scanning with TWAIN-enabled software If you want to scan documents using other software, you will need to use TWAIN-compliant software, such as Adobe Photoshop. Follow the steps below to scan with TWAIN-compliant software: 1. Make sure that the machine is connected to your computer and powered on. 2. Load originals face up into the document feeder, or place a single original face down on the scanner glass (See "Loading originals" on page 1). 3. Open an application, such as Adobe Photoshop. 4. Open the TWAIN window and set the scan options. 5. Scan and save your scanned image. Scanning using the WIA driver Your machine also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is one of the standard components provided by Microsoft Windows XP and works with digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan and easily adjust images without using additional software. The WIA driver works only on Windows XP/Vista/7 with a USB port. Windows XP 1. Make sure that the machine is connected to your computer and powered on. 2. Load originals face up into the document feeder, or place a single original face down on the scanner glass (See "Loading originals" on page 1). 3. From the Start menu, select Control Panel, > Scanners and Cameras. 4. Double click your scanner driver icon. The Scanner and Camera Wizard appears. 5. Click Next. 6. Set the option in Choose scanning preferences window and click Preview to see how your options affect the picture. 7. Click Next. 8. Enter a picture name, and select a file format and destination to save the picture. 9. Your picture has been successfully copied to your computer. Choose one of the options on screen. 10. Click Next. 11. Click Finish. Scanning_ 6