Samsung CXE1931 Owner Instructions - Page 18

Occasionally the TV/VCR will

Get Samsung CXE1931 PDF manuals and user guides View all Samsung CXE1931 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

TV OPERATION 2 You will see the Setup menu. Press CH until "Auto Program" is highlighted. Press VOL- or VOL + button to begin automatic programming. The TV/VCR automatically cycles through all the channel numbers and places only the available channels in memory. This takes about one to two minutes. Press MENU at any time to interrupt the programming process and return to normal viewing. 4 When the programming process is complete, press CH or CH t o scan those channels stared in the TV/VCR's memory. Occasionally the TV/VCR will miss an active channel if the signal is weak or if the channel is off the air when you start programming. Likewise, an unavailable channel may be included in channel memory if there is noise or stray signals on that channel during programming. For information about adding and erasing channels from memory, see below. Adding and Erasing Channels in Memory You can manually add a channel to memory or erase one from memory. To add a channel to memory or erase a channel from memory. 1 Use the number buttons to select the channel you want to add to the TV/VCR's memory or erase from the TV/VCR's memory. Always press 0 before a singledigit channel number. For example, to select channel 8, press 0 then 8. To add three-digit cable-TV channels, press "+l00," then press the next two digits For example, to select channel 104, press "+100," then press "0," then "4". 3.4 CHAPTER THREE TV OPERATION

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
TV O
PERATION
2
You will see the Setup
menu.
Press
CH
until
“Auto Program" is
highlighted.
Press
VOL-
or
VOL
+
button to begin
automatic
programming.
4
When the programming
process is complete,
press
CH
or
CH
to
scan those channels
stared in the TV/VCR’s
memory.
The TV/VCR automatically
cycles through all the channel
numbers and places only the
available channels in memory. This
takes about one to two minutes.
Press MENU at any time to interrupt
the programming process and return
to normal viewing.
Occasionally the TV/VCR will
miss an active channel if the signal is
weak or if the channel is off the air
when you start programming.
Likewise, an unavailable channel
may be included in channel memory
if there is noise or stray signals on
that channel during programming.
For information about adding and
erasing channels from memory, see
below.
Adding and Erasing Channels in Memory
You can manually add a channel to memory or erase one from memory.
To add a channel to memory or erase a channel from memory.
1
Always press 0 before a single-
digit channel number. For example,
Use the number buttons
to select channel 8, press 0 then
8.
to select the channel
you want
to add to the
TV/VCR’s memory or
To add three-digit cable-TV
erase from the TV/VCR's
channels, press “+l00,” then press
memory.
the next two digits For example, to
select channel 104, press “+100,”
then press “0,” then “4”.
3.4
CHAPTER THREE TV OPERATION