Samsung DV52J8700EW/A2 User Manual - Page 43
Information codes
View all Samsung DV52J8700EW/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Problem Items still wrinkled after WRINKLE PREVENT (WRINKLE-CARE, WRINKLE RELEASE). Water drips from the nozzle when STEAM CARE starts. Sprayed water is not visible during STEAM CARE. Extended time. Action • Small loads of 1 to 4 items work best. • Load fewer items. Load similar-type items. • Take out the items immediately after drying is complete. • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed. • Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Information codes If the dryer fails to operate, you may see an information code on the display panel. To determine what you should do, check the list codes in the table below and try the suggested actions. Code dC FC AC Action Operating the dryer with the door open. • Make sure the door is properly closed. • Make sure laundry is not caught in the door. Invalid power source frequency • Try restarting the cycle. • If this information code remains, contact a Samsung customer service center. Electronic control problem (Invalid Communication). • Contact a Samsung a customer service center. Troubleshooting %7+4@&/64JOEE English 43