Samsung DVD-VR300 Flash Guide (flash Manual) (English) - Page 93
Troubleshooting (DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R - region free
View all Samsung DVD-VR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Troubleshooting (DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R) If your product malfunctions, go through the check points below before contacting a Samsung authorized service center, No power. The input is displayed for a while when the power turns on. Cannot record TV programs. • Check whether the power cord is securely plugged into the power outlet. • Did you press the power button of your DVD Recorder-VCR. The DVD Recorder-VCR requires some time to initialize after it is turned on. • Check whether the power cord is securely plugged into the power outlet. • Did you set the DVD Recorder-VCR channel settings correctly? • Check the free space on your DVD-RAM/DVD-RW/DVD-R disc. • Check the antenna cable is connected. Timer recording does not work properly. • Check the recording time, end time and current time settings again. • Recording will be cancelled, if the power is removed due to a power failure or other reason during recording. Cannot record. • Check whether the disc is formatted. This product can record on formatted discs only. (See page 88.) • Is the DVD-RAM cartridge protected? Set the write protect tab to the unprotect position. • Check whether your DVD-RAM/DVD-RW/DVD-R disc has a sufficient free space. I pressed the REC button but there is no response. I forget the pass word for parental care. Recording is available on DVD-RAM/DVD-RW/DVD-R discs only. If a program is copy protected, you cannot record it. Press the ➛➛ and ❿❿ buttons of your DVD Recorder-VCR at the same time when the power is on. All settings including password will revert to factory settings. Do not use it if not absolutely required. (Note that this function is available only when there is no disc inserted.) Cannot playback the disc. • Check whether the disc is inserted correctly with the label facing up. • Check the regional code of your DVD disc. • This DVD Recorder-VCR cannot playback some types of disc. (See page 5.) No sound. • Are you watching a program in slow or skip mode? If you are playing a program at a speed other than normal speed, sound is not output. • Check the connections and initial settings. • Check whether the disc is damaged. Clean up the disc, if necessary. • Check whether the disc is inserted correctly with the label facing up. Reference English - 93