Samsung DVE45R6100P/A3 User Manual - Page 35
Check code, Meaning, Solution, Clg Cg, Ducting requirements, C80 C8, C90 C9
View all Samsung DVE45R6100P/A3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installation Installation check codes Check code 0 Clg (Cg) C80 (C8) C90 (C9) Ct tC C1 dC 9C1 Meaning Vent condition is good. The vent is clogged. About 80 % of the vent is clogged. (This may decrease the drying performance.) Over 90 % of the vent is clogged. (This may lead to poor drying performance or cause malfunction) The internal temperature of the dryer is too low (below 32 °F (0 °C)) or too high (over 104 °F (40 °C)) and therefore vent blockage cannot be detected. Temperature sensor error Unit is detecting items inside the drum or there is an error on the dry sensor. Unit is detecting door is open Abnormal voltage detected Solution 1. Clean the lint filter. 2. Check your vent condition. (Refer to the "Ducting requirements" section) * You must take measures (such as cleaning) through expert personnel. Leave the dryer at room temperature (41~95 °F (5~35 °C)) for an hour and check again. Contact a service center. Remove items from the drum and check again. If the problem continues, contact a service center. Close the door properly and check again. If the problem continues, contact a service center. Check the power connection. (Refer to the "Connect the electrical wiring (for electric models)" section) If the problem continues, contact a service center. Untitled-4 35 English 35 2020-07-14 12:33:05