Samsung DVR-5100 User Manual

Samsung DVR-5100 Manual

Get Samsung DVR-5100 PDF manuals and user guides View all Samsung DVR-5100 manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung DVR-5100 manual content summary:

  • Samsung DVR-5100 | User Manual - Page 1
    8 CHANNEL/ 16 CHANNEL DVR User Manual SDS-P5101/SDS-P5100/SDS-P4080
  • Samsung DVR-5100 | User Manual - Page 2
    are subject to change without prior notice. ™™The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
  • Samsung DVR-5100 | User Manual - Page 3
    block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • Samsung DVR-5100 | User Manual - Page 4
    prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. WARNING 1. Be sure to use contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized
  • Samsung DVR-5100 | User Manual - Page 5
    DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG the Instructions. . ❖❖Ethernet Port DVR is designed
  • Samsung DVR-5100 | User Manual - Page 6
    3 3 Important Safety Instructions 5 Before Start 6 Contents 8 Features 11 Part Names and Functions (Front) 12 Part Names and Functions (Rear) 13 Remote Control connecting with other device 15 15 installation 15 Checking the Installation Environment 16 Connecting the Video, Audio and Monitor 16
  • Samsung DVR-5100 | User Manual - Page 7
    Live Viewer (Windows) 90 Using Search Viewer 94 Viewer Setup 105 About 106 Mobile Viewer backup viewer 108 108 SEC Backup Viewer appendix 111 111 Product Specification (Camera) 112 Product Specification(DVR) 118 Default Setting 121 Troubleshooting 124 Open Source License Report on the Product
  • Samsung DVR-5100 | User Manual - Page 8
    supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and , if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • Samsung DVR-5100 | User Manual - Page 9
    /p5100 package DVR (1SET) Adapter (1EA) / Power Cable (1EA) Mouse (1EA) Remote Control (1EA) / Battery (2EA) SDC-5340BC (10SET) Camera Cable (10EA) Camera Power Cable (1EA) Network Cable (1EA) HDMI Cable(1EA) * SDS-P5101 only Expansion pipe and Screw (30EA) Manual CD (1EA) Quick Start
  • Samsung DVR-5100 | User Manual - Page 10
    overview ❖ SdS-p4080 package DVR (1SET) Adapter (1EA) / Power Cable (1EA) Mouse (1EA) Remote Control (1EA) / Battery (2EA) SDC-5340BC (8SET) Camera Cable (8EA) Camera Power Cable (1EA) Network Cable (1EA) Expansion pipe and Screw (24EA) Manual CD (1EA) Quick Start Guide (1EA) Warranty
  • Samsung DVR-5100 | User Manual - Page 11
    And funCTionS (fronT) Sdr-5100/4100 a bc Part Names a USB Port b Remote Control Receiver c LED Indicator Connects the USB devices. Functions Input the remote control signal. POWER : Displays the power ON/OFF status. ALARM : Lights on when an event occurs. REC : Lights on when recording is in
  • Samsung DVR-5100 | User Manual - Page 12
    signal. Input port for the composite video signal. Used to establish RS-485 communications. Output port for VGA video signal. DVR power input port. NETWORK connector port. HDMI connector port. Output port (RCA jack) for the audio signal. MM `` [CONSOLE] is designed for the service repair purpose
  • Samsung DVR-5100 | User Manual - Page 13
    Select Menu. FREEZE Freezes the screen temporarily. ZOOM Runs the digital zoom (x2) function. REC Starts or ends the live recording. BACKUP Displays the Backup Menu. DVR Activates the DVR function. ID Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key. Move Frame While
  • Samsung DVR-5100 | User Manual - Page 14
    Control ID 1. Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00. 2. Enter 2 digits of your selection in order, while pressing the system [ID] button. 3. When ID input is done, press the system [ID] button again
  • Samsung DVR-5100 | User Manual - Page 15
    CheCKinG The inSTALLATion environmenT Samsung Digital Video Recorder ("DVR" hereinafter) is a stateof-art security device, and contains [Figure 1] Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions : A) Elevated Operating
  • Samsung DVR-5100 | User Manual - Page 16
    , Audio And moniTor CH1 CH2 CH3 CH4 VIDEO IN AUDIO IN 1 VIDEO IN AUDIO IN AUDIO OUT 2 3 4 9 5 10 6 11 12 13 14 7 8 15 16 + RS 485 VGA OUT DC 12V CONSOLE NETWORK ConneCTinG The uSB 1. By factory default, a USB port is provided for external connection. 2. You can connect a USB
  • Samsung DVR-5100 | User Manual - Page 17
    3.6mm enables you to cover relatively longer range of monitoring. c Illumination Sensor Detects incoming light to control the IR LED. d BNC Cable BNC terminal for video signal output. e Power Cable Used to plug the power cable. English _17
  • Samsung DVR-5100 | User Manual - Page 18
    connecting with other device Connecting with dvr ` The following figures are based on Model SDR-5100. CH1 CH2 CH3 CH4 VIDEO IN AUDIO IN 1 VIDEO IN AUDIO IN AUDIO OUT 2 3 4 9 5 10 6 11 12 to water or moisture may cause problem such as condensation. 18_ connecting with other device
  • Samsung DVR-5100 | User Manual - Page 19
    -485 +, -] port to the PTZ camera or system keyboard. J ` You can connect and control the PTZ camera which supports the RS-485 communication figures are based on Model SDR-5100. Connecting to network through ethernet (10/100BaseT) CH1 CH2 CH3 CH4 VIDEO IN AUDIO IN 1 VIDEO IN AUDIO IN AUDIO
  • Samsung DVR-5100 | User Manual - Page 20
    15 16 VGA OUT DC 12V CONSOLE NETWORK Broadband Router External Remote PC xDSL or Cable Modem NETWORK xDSL or Cable Modem DDNS Server (Data Center) Connecting to Network through ADSL CH1 CH2 CH3 CH4 VIDEO IN AUDIO IN 1 VIDEO IN AUDIO IN AUDIO OUT 2 3 4 9 5 10 6 11 12 13 14
  • Samsung DVR-5100 | User Manual - Page 21
    shut down the system only if you have logged in to the DVR. You require permission to shut down the system if you are not logged in 01:10:25 2. The "Shutdown" confirmation window appears. 3. Use the arrow keys on the remote control to move to and press the [enTer] button or click . The
  • Samsung DVR-5100 | User Manual - Page 22
    requires logging in. ` After logged in, press [RETURN] on the remote control to display the logout dialog. ` By default, initial ID and password are set to "admin", and "4321". Login  ID  Password admin OK Cancel J ` The default password can be exposed to a hacking thread so it is recommended
  • Samsung DVR-5100 | User Manual - Page 23
    is displayed if a user with restricted access to the Record button tries to make manual recording. `` Only the user with the applicable permission can release (stop) the recording. Displayed if the HDD is full and the DVR has an insufficient space to record. Displayed if no HDD is installed or the
  • Samsung DVR-5100 | User Manual - Page 24
    , the "NO HDD"( ) message will appear; if there occurs a problem, you will see the "HDD FAIL"( ) message in the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup. M ` If you see NO HDD, HDD FAIL
  • Samsung DVR-5100 | User Manual - Page 25
    Freeze Stop Alarm Record Play Search Backup Main 75) h Backup Refer to "Main Menu > Setting the Backup". (Page 57) i Main Menu Accesses the main menu. Refer to the Using the DVR section. (Page 33) j Shutdown Turns down the DVR. k Show/Hide Launcher Shows or hides the launcher. Refer to "View
  • Samsung DVR-5100 | User Manual - Page 26
    One Channel mode, in Split mode is different from that of the Single mode. a b Full Screen PTZ Control Zoom In Audio On Freeze Stop Alarm Record Play Shutdown Hide Launcher Logout 2012-01-01 01:10:25 Alarm Freeze Menu a Full Screen b Zoom In Description Select and click a desired channel in
  • Samsung DVR-5100 | User Manual - Page 27
    ! Live view the Launcher menu The Launcher menu appears on the bottom of the live screen. 1. 10 seconds, the menu will disappear. ` The Launcher menu can be accessed only by using the mouse. ` SDR-4100 does not support the 16-split screen mode. 2012-01-01 01:10:25 2012-01-01 01:10:25 2012-01-01
  • Samsung DVR-5100 | User Manual - Page 28
    right-click to select a screen mode in the context menu. Press the [MODE] button on the remote control to switch the mode in the sequence of the launcher menu items. MM `` SDR-4100 does not support the 16-split screen mode. CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH5 CH6 CH7 CH8 CH1
  • Samsung DVR-5100 | User Manual - Page 29
    CH4 CH5 CH3 CH3 CH3 CH6 CH6 CH6 CH7 CH7 CH7 ! live ; Manual Switching CH1 CH1 CH1 CH4 CH4 CH4 CH8 CH8 CH8 CH1 CH1 CHC1H19CH19 CH19 CH2 CH2 CH2 CH4 CH5 CH1 CH1 CH1 Press the left/right button on the remote control, or click the arrow CH2 CH3 CH2 key CH6CH3 to move CH4
  • Samsung DVR-5100 | User Manual - Page 30
    a desired channel to switch to its Single mode. CH5 CH6 CH1 CH8 Press the number corresponding to a desired channel on the remote control to switch to its Single mode. • CHCHA9 NNECHL10 1-9CH1:1 PreCsHs12 each button between 1 to 9. (8CH : 8) • CHCHA13NNECHL14 10 C:H1P5 resCsH16the [0/+10
  • Samsung DVR-5100 | User Manual - Page 31
    in the right-click menu. Press the [Zoom] button on the remote control, or simply click < box appears. > in the launcher menu. The zoom the audio icon ( ) on the screen, or press the [Audio] button on the remote control to turn it on/off. M ` Only the channel where is set to
  • Samsung DVR-5100 | User Manual - Page 32
    This will display the channel in sync with a specific event (Motion/Video Loss) if it occurs. In "Monitor > Event Display", set the CH2 CH1 CH1 CH1 CH1 CH1 MM `` Press the [ALARM] button to reset the alarm settings and to release the event mode. `` If an alarm activates in the condition you
  • Samsung DVR-5100 | User Manual - Page 33
    setup the system properties, devices, and options for recording, event, backup and network. SYSTem SeTuP You can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language You can check and setup may help make setup easier. 1. Press the [menu] button on the remote control. `
  • Samsung DVR-5100 | User Manual - Page 34
    of world time zone. OK Cancel • Time Sync. : You can set the DVR's current time synchronized to a selected regularly if you select to use When the Date/Time/Language setup is done, press . M ` You can also use numeric buttons on the remote control to enter values for Date
  • Samsung DVR-5100 | User Manual - Page 35
    Setting Holiday You can set specific dates to Holidays according to your preferences. Holidays are applied to and too. Using the mouse may help make setup easier. 1. Use the up/down buttons ($%) in window to select
  • Samsung DVR-5100 | User Manual - Page 36
    default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user. 4. When the administrator setup them forward and backward
  • Samsung DVR-5100 | User Manual - Page 37
    up to 10 groups. OK Cancel - Add : When you first run the DVR with the admin account, only the admin account exists. Add has already been Live View : You can set the permission to access the Live screen according to the channel. ` SDR-4100 shows a list of 8 channels in Channel Setup window.
  • Samsung DVR-5100 | User Manual - Page 38
    that group can access only the default minimum menus and can change the user's own password only. 1. Start the DVR. If all permissions are restricted, Scene Mode  Audio Off Freeze Stop Alarm Record User Menu Hide Launcher Logout To change the user password If you log in with a user account that
  • Samsung DVR-5100 | User Manual - Page 39
    , refer to the SmartViewer's user guide. Previous/Next Page OK Cancel Permission Management Admin Group User  Group AdAdll GUrsouepr Group  Name Name  ID  Viewer  Select Group  Password  Confirm P/W ID Not Used ABC OK Cancel Viewer Setup Add Del Previous/Next Page 4. When
  • Samsung DVR-5100 | User Manual - Page 40
    View Backup All  Restriction on Network Access All Network Web Viewer  Auto Log out OFF  Manual Input of ID ON User Setup on Network Access : Restricts remote access from a
  • Samsung DVR-5100 | User Manual - Page 41
    broadcasting system, MAC address. You can update the system. Using the mouse may help make setup easier. 1. Use the up/down buttons S/W Upgrade : Updates the DVR's software up to date. System Management System Information Settings  System Information  Software Version v1.0xh_yymmddhhmmss 
  • Samsung DVR-5100 | User Manual - Page 42
     Software Version V1.0xh_yymmddhhmmss  BroadcastSFo/WrmaUt pgraNdTeSC  MAC Address 00:00:F0:54:FF:FF Software upgradiSngo consult the service center for assistance. ` When you perform S/W update remotely using Smart Viewer, it may take a max of 3 minutes to complete the update since Smart
  • Samsung DVR-5100 | User Manual - Page 43
    setup easier. 1. Use the up/down buttons ($%) in window to move to , and press [enTeR] button. 2. Select . A window of storage device and load factory default appears. System Management System Information Settings  Storage Device  DVR Type View all
  • Samsung DVR-5100 | User Manual - Page 44
    log shows recorded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier. Search Day First Page 2012-01-01 Last Page Search CH All CHs Type View all No. Log List 7 Motion Detection [CH 7] 6 Motion Detection [
  • Samsung DVR-5100 | User Manual - Page 45
    channel's camera. - : Shows information other than the video of Screen Setup Privacy Region OK Cancel Previous/Next Page the selected channel. ` For privacy protection, it does not display the video while the recording continues. - : Shows nothing but an empty screen
  • Samsung DVR-5100 | User Manual - Page 46
    Setup : The video appeared on the screen may vary depending on the channel's camera, configure the DVR display to your preferences. Select a channel and adjust the < (Brightness)>, < (Contrast)>, and < (Color)> of the selected channel. ` Press the to initialize settings back to the default
  • Samsung DVR-5100 | User Manual - Page 47
    Setting the PTZ To use Camera's PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the "Remote Devices" settings. (Page 49) Using the mouse may help make setup easier. 1. Use the up/down buttons ($%) in window to move to , and
  • Samsung DVR-5100 | User Manual - Page 48
    menu Formatting You can format a storage device. Using the mouse may help make setup easier. 1. Use the up/down buttons ($%) in window to move to Used/Total 3.95G/0.98T Formatting deletes all recordings. Proceed formatting? OK Cancel Format OK Cancel Usage Internal 48_ main menu
  • Samsung DVR-5100 | User Manual - Page 49
    port. • Duration : Sets the alarm duration for the alarm signal and beep sound. M ` status means that the HDD is operating but it has problems Set the values of each communication setup of the remote device. • Baudrate : Baud rate settings of the DVR, PTZ camera and system keyboard should
  • Samsung DVR-5100 | User Manual - Page 50
    video properly. When the monitor setup is done, press . Setting Display position Some monitors many not display information (camera name, icon, time information, etc.) about the DVR 9-, and 4-split screens are included by default. SDR-4100 doesn't support 16-split screen mode. • Play Screen :
  • Samsung DVR-5100 | User Manual - Page 51
    Make your reservation on a date and time to schedule the recording on specified time. Using the mouse may help make setup easier. 1. Press the [menu] button on the remote control. 2. Use the left/right button (_ +) to select . Record menu is selected. 3. Use the up/down buttons ($%) to move
  • Samsung DVR-5100 | User Manual - Page 52
    You can set the beginning and ending point of a recording on an event. Using the mouse may help make setup easier. 1. Use the up/down buttons ($%) in window to move to , and press [enTeR] Event Record Duration button. CH Pre Event  1 OFF  2 OFF  2. Use
  • Samsung DVR-5100 | User Manual - Page 53
    . 2. Select . Event recording setup window appears. 3. Use direction buttons ($%_ +) to move to a desired item, and select it. • Resolution : Sets the resolution of the recorded screen. • Record Rate : Frames recorded per second. • Record Quality : Sets the recording quality. REC Quality
  • Samsung DVR-5100 | User Manual - Page 54
    to stop or overwrite when the HDD is full. Using the mouse may help make setup easier. 1. Use the up/down buttons ($%) in window to move to , and press [enTeR] button. Record Option 2. Use direction buttons ($%_ +) to move to a desired item, and set the value. • Disk End
  • Samsung DVR-5100 | User Manual - Page 55
    You can set recording options for motion, and video loss event. motion Detection You can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the area. Using the mouse may help make setup easier. 1. Press the
  • Samsung DVR-5100 | User Manual - Page 56
    5 OFF If a videoloss event occNurosndeuring the event 10 sec  recording, the POST recording settings of the 6 OFF applicable channeNl ownilel be reset. 10 sec  will appear if a video loss event occurs. 3. When the video loss detection setup is done, press . Se alarm Schedule You
  • Samsung DVR-5100 | User Manual - Page 57
    device from the recognized devices. • Type : Sets the backup data format. - DVR : Saved data can be played back only by the DVR. - SEC : Saves data in the Samsung's proprietary format with built-in viewer, which supports immediate playback on a PC. • Filename : You can set the back file name
  • Samsung DVR-5100 | User Manual - Page 58
    of Live screen from a remote place, and supports mail forwarding function with events. You Mode DDNS Live Transfer Mailing Service Network 4. Select . A window of connection mode setup appears. 5. Use direction buttons 255.255.255.0 Manual 168.126.63.1 OK Cancel 58_ main menu
  • Samsung DVR-5100 | User Manual - Page 59
    between 4505 and 4530 with the Web Viewer port of 80. This is a security measure in order to enable Silverlight. M ` As UDP protocol may cause a packet loss on the network, it is recommended to use TCP protocols. ` If you select UDP protocols and set port forwarding in the IP router, ending up with
  • Samsung DVR-5100 | User Manual - Page 60
    ~4524 DVR 2 WEB Manual 168.126.63.1 OK Cancel OK Cancel Connection Mode Connection Protocol  Protocol Type  Port(TCP)  Port(UDP)  Unicast/Multicast  Multicast IP  TTL  Webviewer Port TCP 4520 ~ 4524 8000 ~ 8160 Unicast 224.126.63.1 5 80 * Multi Browser Support : TCP Port
  • Samsung DVR-5100 | User Manual - Page 61
    , 4522, 4523, 4524) SDR-5100 192. 168. 1. 200 TCP 4520 4520 • 2nd Set Port Forwarding Setting Port Forwarding is 4525~4529 (4525, 4526, 4527, 4528, 4529) SDR-5100 192. 168. 1. 202 TCP 4525 4525 Port Forwarding is 80 SDR-5100 192. 168. 1. 200 TCP 80 80 Port Forwarding is 81 SDR-5100 192. 168. 1. 202
  • Samsung DVR-5100 | User Manual - Page 62
    between the DVR and remote user. - DVR Network Settings : Set the in menu of the connected DVR to
  • Samsung DVR-5100 | User Manual - Page 63
    Network (LAN) environment. • Setting the DVR Network 1. Set the in menu of the connected DVR to . 2. Check whether the IP router, it prompts with password. While entering nothing to the User Name field, enter "admin" into the password field and press to
  • Samsung DVR-5100 | User Manual - Page 64
    ~ 8160 Unicast 224.126.63.1 5 80 * Multi Browser Support : TCP Port 4505~4530, Webviewer Port 80 OK Cancel M ` Above steps may differ from the router devices depending on the manufacturer. Port forwarding is required when you want to access the DVR connected to the router from outside of the
  • Samsung DVR-5100 | User Manual - Page 65
    your router IP address. b z Type your router Username & Password. If you haven't changed them, skip this procedure, for it provides default value. c 4. x Click in Check List for choosing the ports. a b y Click for updating your router IP address. IP Address : 192.168.1.200 Type
  • Samsung DVR-5100 | User Manual - Page 66
    HOmeDVR>. ` The router used should support uPNP Port Forwarding function. ` Note that uPNP Port Forwarding does not support UDP protocol. ` If the program fails to read uPNP Port Forwarding List, try again after restarting the computer and router. 3. When the DDNS setup is done, press . 66_
  • Samsung DVR-5100 | User Manual - Page 67
    DDNS (Dynamic DNS) is a service that registers a domain name and the DVR to the following : Ex) Protocol Type : TCP Port (TCP) : 4520~4524 DDNS Site : iPOLiS ❖ iPOLiS DDnS Setting 1. Visit http://www.samsungipolis.com or http://www.samsungipolis.co.kr and click . 2. If you have ID & PASSWORD
  • Samsung DVR-5100 | User Manual - Page 68
    the network settings are right. OK Cancel Live Transfer Sets the quality of the image that is transferred from the DVR to the network. Using the mouse may help make setup easier. 1. In the setting window, press the up/down ($%) button to move to and press the [enTeR
  • Samsung DVR-5100 | User Manual - Page 69
    the connected server type. • Server : Enter a server to connect to. • Port : Sets the communication port. Mailing Service SMTP Event  ServerType  Server  Port SMTP mail Server Use Authentication User Password  Secure Transfer  Sender TEST Never OK • Use Authentication : Check this if
  • Samsung DVR-5100 | User Manual - Page 70
    event interval. ` If a series of events occurs, the e-mail will be sent at the specified interval, not on each event. Mailing Service SMTP Event Group  Event Interval 10 min  Use Event Transfer Motion Change P/W Power On/Off HDD Info Manual Record Recipient Video Loss OK Cancel • Use
  • Samsung DVR-5100 | User Manual - Page 71
    the group if necessary. Using the mouse may help make setup easier. 1. In the setting window, press the up/down ($%) button to move to and press the [enTeR] button. 2. Select . Mailing Service SMTP Event  Group Group All Group Name Group Recipient
  • Samsung DVR-5100 | User Manual - Page 72
    DVR enables in the following way : ` Using the remote control buttons Press the [PTZ] button on the remote control. ` Using the launcher menu Click PTZ 10:2S5cene Mode  PTZ Control Zoom In Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Logout ` Using icons on
  • Samsung DVR-5100 | User Manual - Page 73
    buttons ($%_ +) on the remote control to move the camera to Select Exit Camera Setup Select Preset Save ( ) : Enables you to adjust the focus manually. • Auto Pan : The camera automatically runs Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are different
  • Samsung DVR-5100 | User Manual - Page 74
    list with a new one, you should reset the preset accordingly. 3. Press . Setup> in the PTZ Control menu. The camera-specific menu appears. ` You can configure the settings of only those cameras that support the protocols of Samsung, Pelco Camera Setup  Exit CAMERA SET... VIDEO SET... PRESET...
  • Samsung DVR-5100 | User Manual - Page 75
    remote control. 2012-01-01 01:10:25 Scene Mode  Audio Off Freeze Stop Alarm Record Recording > Record Option". (Page 54) M ` Overlapped data : It only appears if there exists overlapped data on a certain time, produced due to the change of DVR's time setup 2012-01-01 Go to First Go to Last
  • Samsung DVR-5100 | User Manual - Page 76
    zoom it in/out. Time Search 2012-01-01 Go to First Go to Last Overlapped Data List1 2012/01/01 00 portion. - If the selected channel does not contain any recorded data, it will be marked black. 5. Select a play them. Using the mouse may help make setup easier. 1. Select in the <
  • Samsung DVR-5100 | User Manual - Page 77
    Page  File Name 16190000  Channel info 1  Record Period 2012-01-01 01:01:01 - 2012-01- Go to First Go to Last Start Time 01:01:30 01:01:25 01:01:20 01:01:15 01:01:10 01:01:05 01:01:01 Previous/Next Page Play Return - Manual Area : You can set the motion area manually. • Setup : The Setup
  • Samsung DVR-5100 | User Manual - Page 78
    remote control. 2. Use the up/down button ($%) to select a menu. ` For data search, refer to . (Page 75) 2012-01-01 01:10:25 Scene Mode  Audio Off Freeze Stop Alarm Record and the "Backup Range" window appears. - Type : Supports formats of DVR and SEC. Refer to a list of formats in "Setting
  • Samsung DVR-5100 | User Manual - Page 79
    . And some frame rates may be supported. j Forward Fast Play Used for quick forward playback. k Skip Forward Moves forward by unit time. l Return Return to the search setup screen. m Audio n REC Sets Audio ON/OFF. ` If using both web view and DVR set simultaneously, the audio signal will
  • Samsung DVR-5100 | User Manual - Page 80
    Viewer Introducing Web Viewer What is Web Viewer? Web Viewer allows remote access to your DVRs. You have access to live video, archived video etc. Product Features • Remote access from a standard browser • Supports 1, 4, 9, 16 camera viewing formats (maximum of 16 cameras in the list). • Gets JPEG
  • Samsung DVR-5100 | User Manual - Page 81
    VIeWer connectIng Web VIeWer (MAc) ❖ Safari on MAc. If you want to use DVR Web Viewer with Safari Browser on a Mac, please refer to this user guide and install Multi Viewer with firmware upgrade if necessary. • Brower versions available: Safari 5.1.1 or later version • Silverlight: 4.0.60831.0 or
  • Samsung DVR-5100 | User Manual - Page 82
    & Web Viewer port settings] below. 4. If the screen above does not appear, check if the DVR set is connected properly with a valid IP address. uSIng lIVe VIeWer (MAc) The Live Viewer screen consists of following : a c d e f g h i b k j a This displays the IP address and the model name of the
  • Samsung DVR-5100 | User Manual - Page 83
    ` You can also use registered URL which setups up in the Setup menu of your DVR. http://www.samsungipolis.com/HOMEDVR 2. Set the Admin ID and password same to those of the DVR Admin. For general users, enter the DVR user ID and password. J ` The default password can be exposed to a hacking thread
  • Samsung DVR-5100 | User Manual - Page 84
    of following : a c d e f g h i b j The Live Viewer screen consists of following : a This displays the IP address and the model name of the connected DVR. b These menus consist of , , , . c These buttons are used for the screen split and full screen mode. d Shows the IP
  • Samsung DVR-5100 | User Manual - Page 85
    Information display a a The channel number, video size, and IP address of the connected DVR are displayed. b b This icon will to the DVR in "nIne Mode". • Click < > button. The screen displays the selected camera connected to the DVR in "SIxteen Mode". SDR-4100 doesn't support 16-split
  • Samsung DVR-5100 | User Manual - Page 86
    the OSD time information display setting. • dVr time : Based on the time of the connected DVR • Pc time : Based on the time of the PC currently running the Web Viewer. • Audio : Sound On/Off changing the live Screen Mode ` 16-split mode does not support "SEQUENCE", "PREVIOUS" and "NEXT". • SeQuence
  • Samsung DVR-5100 | User Manual - Page 87
    CH13 to CH16) Saving the live Screen on the Pc • cAPture : Saves the current screen into a BMP or JPEG file. M ` The default saving path is "C:\Program Files\Samsung\DVR Web Viewer\SnapShot\Live". To change the saving path, click button and then select the path you want. For Windows
  • Samsung DVR-5100 | User Manual - Page 88
    : Saves the current image on the screen and saves it as a avi video file. M ` To record it, it is required at least 1GB of available space. ` The default saving path is "C:\Program Files\Samsung\DVR Web Viewer\VideoClip\Live". To change the saving path, click button and then select
  • Samsung DVR-5100 | User Manual - Page 89
    the pattern. MM `` While the DVR controls a PTZ camera, Web Viewer cannot control the camera. `` Camera menu setup is only available for camera supporting the function. `` Each function of PTZ Tilt functions are only available for camera supporting the functions. Ex : Samsung SCC-C6475 English _89
  • Samsung DVR-5100 | User Manual - Page 90
    a This displays the IP address and the model name of the connected DVR. b These menus consist of , , , . c These buttons are used recorded video. M ` , , buttons are not available in SEARCH menu. ` During the DVR backup, you may have a trouble
  • Samsung DVR-5100 | User Manual - Page 91
    "QuAd Mode". M ` Only SINGLE and QUAD MODE are available in SEARCH menu. connected dVr This displays the IP address and the status of the connecting DVR. M ` Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is
  • Samsung DVR-5100 | User Manual - Page 92
    button saves the video data of the selected channel as an AVI file. (It is saved in the designated folder on your PC.) To stop recording, click this button again. M ` To record it, it is required at least 1GB of available space. ` The default saving path is "C:\Program Files\Samsung\DVR Web Viewer
  • Samsung DVR-5100 | User Manual - Page 93
    one on top. Searching the recorded Video In the timeline It displays the recorded video data status on the DVR after a date is selected. The time line represents 5 minutes. M ` For SDR-5100, channels are ranging from CH01 to CH16. For SDR-4100, channels are ranging from CH01 to CH08. English _93
  • Samsung DVR-5100 | User Manual - Page 94
    one step forward by one frame. i go to last : Moves the last time of recorded video in the time line. M ` Only the admin account can play the audio signal during the playback. If using both web view and DVR set simultaneously, the audio signal will be output from the DVR set. VIeWer SetuP You can
  • Samsung DVR-5100 | User Manual - Page 95
    DVR. holiday You can set specific dates to Holidays according to your preferences. For more information, refer to in the menu. (Page 35) Permission Management For more information, refer to in the menu. (Page
  • Samsung DVR-5100 | User Manual - Page 96
    and the permission can be set according to the group. ` First of all, add a group. • user You can add, change or remove a user or users. • Setup You can set the user permission. System Management For more information, refer to in the
  • Samsung DVR-5100 | User Manual - Page 97
    "Setting the device". (Page 45) camera • camera You can configure the settings of the camera that is connected to the DVR. • Privacy region You can specify a certain area of the camera video to be protected for your privacy. • PtZ You can configure the settings of the PTZ camera that is connected to
  • Samsung DVR-5100 | User Manual - Page 98
    device You will see a list of storage devices that are connected to the DVR. You can check the type, used/total, usage and status of the device error. remote device You can see a list of remote devices including PTZ cameras and system keyboards that are connected to the RS-485 port of the DVR and
  • Samsung DVR-5100 | User Manual - Page 99
    ! Web VIeWer Monitor • Monitor You can configure the monitoring screen settings and set the output system. • Mode You can switch between live mode and play mode. English _99
  • Samsung DVR-5100 | User Manual - Page 100
    , refer to "Setting the recording". (Page 51) recording Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. - Apply to All CH : Click to display the confirmation window. event record duration You can set the
  • Samsung DVR-5100 | User Manual - Page 101
    ! Web VIeWer rec Quality & resolution • Standard/event You can set the resolution, frame rate and recording quality for each channel. record option You can set the Disk End Mode. event For more information, refer to "Setting the event". (Page 55) Motion detection You can set the
  • Samsung DVR-5100 | User Manual - Page 102
    Web Viewer Video loss detection You can set the alarm output time if a video loss occurs. Alarm Schedule You can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs. 102_ Web Viewer
  • Samsung DVR-5100 | User Manual - Page 103
    ! Web VIeWer network For more information, refer to "network configuration". (Page 58) connection A remote user can access the DVR via the network to check the current mode and the IP address. • connection You can set the network connection route. • Protocol You can configure the
  • Samsung DVR-5100 | User Manual - Page 104
    user can set the images of the DVR. • live transfer A remote user can set the image resolution of the transferred data. Mailing Service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. • SMtP You can set the
  • Samsung DVR-5100 | User Manual - Page 105
    to receive the event mail for each group. • recipient You can add a user or users who will receive the mail. About Click . Displays the model name of connected DVR and the version of Web Viewer. English _105
  • Samsung DVR-5100 | User Manual - Page 106
    Viewer? iPOLIS mobile is smartphone application that enables you to connect to DVR (Digital Video Recorder) remotely and control the video playback and PTZ operations (if configured) in real time. Using a Smartphone 1. Download the Samsung iPOLiS mobile app. On an Android phone, visit Play Store. On
  • Samsung DVR-5100 | User Manual - Page 107
    RTSP Port : Enter the Port (TCP) you wrote down earlier. Camera : Select the cameras you want to view. 5. Enter the User ID and Password for the DVR. JJ Default user login info is ID : admin and Password : 4321 Key Features • Remote access via Smartphone • 1-split and 4-split modes supported in
  • Samsung DVR-5100 | User Manual - Page 108
    recommended System requirements PCs with a lower specification than the recommended below may not fully support forward/backward and high-speed playback. • OS : Windows XP professional, Windows Vista, Windows 7 (It is not supported by MAC OS.) • CPU : Intel Core2-Duo 2.4GHz or higher • RAM : DDR PC
  • Samsung DVR-5100 | User Manual - Page 109
    the current screen as an image file. Supported file formats include BMP and JPEG. Prints to 1 minute. Displays the time range of a stored video file. You can move the gridline of the range bar can adjust the play speed up to x16 forward and backward respectively, which varies according to the
  • Samsung DVR-5100 | User Manual - Page 110
    h Play Description Displays the next frame. This is available only if the playback is stopped. A toggle button. Press it once to start playing the video and switch the button mode to 'Pause', and press it again to switch the button mode to Play and stop playing temporarily. Displays the previous
  • Samsung DVR-5100 | User Manual - Page 111
    SDC-5340BCP Electrical Input Voltage Power Consumption Video Imaging Device Total Pixels Scanning System Synchronization Angular Field of View H: 60˚ V: 48˚ Operational Shutter Mode Auto (Rolling Shutter) Gain Control Auto White Balance Auto (3200°K~6500°K) Digital Noise Reduction Auto
  • Samsung DVR-5100 | User Manual - Page 112
    -event Search mode Playback function Transmission speed Stream Maximum No. of remote users Protocol support Monitoring Smart phone Protocol support Transmission speed Remote users Maximum Details SDR-4100 8 composite video 0.5-1 Vpp, 75 ohm 704x480 NTSC, 704x576 PAL 240fps NTSC, 200fps PAL 704x480
  • Samsung DVR-5100 | User Manual - Page 113
    711 8KHz Notification via e-mail 1 RJ-45 10/100 Base-T - USB 2.0, 2 ports (Front x 2, 1A) - Mouse, Remote Controller RS485 (SAMSUNG-T, VICON, PANASONIC, AD, PHILIPS, Pelco D,Pelco P, SAMSUNG-E) Supported Input Voltage/Current Power consumption Operating Temperature/ Humidity 100 ~ 240 VAC ±10%; 50
  • Samsung DVR-5100 | User Manual - Page 114
    appendix Mechanical Lauguage Item Dimension (W X H X D) Weight (With hard disks) Gross weight Box Size (Outer) Details SDR-4100 W360 X H44 X D160mm (14.17 X 1.73 X 6.3 inch) 1.6Kg SDS-P4080: 8Kg NTSC: W455 X H303 X D299mm (17.91 x 11.77 x 11.93 inch) English, Spanish, French, German, Italian,
  • Samsung DVR-5100 | User Manual - Page 115
    remote users Protocol support Monitoring Details SDR-5100 16 composite video 0.5-1 Vpp, 75 to 480fps @ 352x240 / PAL: Up to 400fps @ 352x288 Manual, Schedule, Event Continuous Off/5sec Up to 6 hour. (5, Back up, Motion Fast Forward / Backward, Slow Forward / Backward, Step Forward / Backward CIF 100/
  • Samsung DVR-5100 | User Manual - Page 116
    speed Remote users Maximum Internal HDD CIF Max 15fps(Single Channel)/ CIF Max 2fps(Quad Channel) Live(1) SDS-P5101: 1TB SATA HDD, SDS-P5100: 2TB SATA HDD External HDD - DVD Writer (Back-up) - USB (Back-up) 2 USB Ports File Format (Back-up) BU (DVR Player), SEC (Include Player) Password
  • Samsung DVR-5100 | User Manual - Page 117
    support Details SDR-5100 1 RJ45 10/100 Base-T - USB 2.0, 2 ports (Front x 2, 1A) - Mouse, Remote Controller RS485 (SAMSUNG-T, VICON, PANASONIC, AD, PHILIPS, Pelco D,Pelco P, SAMSUNG (With hard disks) SDS-P5100: 1.75kg, SDS-P5101: 1.68Kg Gross weight SDS-P5100: 9.9kg, SDS-P5101: 9.91Kg Box
  • Samsung DVR-5100 | User Manual - Page 118
    made as follows; • Use System/Load Factory Default in MENU ``The default settings are based on SDR-5100. ``The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the
  • Samsung DVR-5100 | User Manual - Page 119
    Region Video Loss State Video Loss Detection Alarm Alarm Duration Alarm Schedule BEEP Event Display Display Multi CH SEQ Time VGA/HDMI Display Position Setup Live Mode Play Mode Resolution Frame Rate Record Quality Resolution Frame Rate Record Quality Setup Disk End Beep Factory Default OFF
  • Samsung DVR-5100 | User Manual - Page 120
    Group Recipient Connection Mode Bandwidth IP Gateway Subnet Mask DNS Protocol Type Port (TCP) Webviewer Port Server Port Use Authentication Secure Transfer Event Interval Use Event Transfer Group Recipient Permission Group Factory Default Static IP 2Mbps 192.168.1.200 192.168.1.1 255.255.255.0 168
  • Samsung DVR-5100 | User Manual - Page 121
    case, input the video source of the camera directly into the DVR. This may find the cause and solve the problem. If I press the [REC] button on the remote control, nor yy Check if there is a free space on the HDD for the recording. the player start recording. yyCheck if the record mode is set to
  • Samsung DVR-5100 | User Manual - Page 122
    for a quick start, refer to the quick start guide (backup, search). yy If you use the router for network connection, refer to the "Connecting to the Internet using the router" section in this manual. I forgot the password. yyContact the DVR administrator for help. Backup data is just not played
  • Samsung DVR-5100 | User Manual - Page 123
    the screen. yyRecording does not work if the recording settings are not properly configured. 1) Manual Record: Press the [REC] button on the remote control to start recording. 2) Scheduled Record: Specify a desired time in Menu - Record Recording Schedule. Recording will start at the specified time
  • Samsung DVR-5100 | User Manual - Page 124
    software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service under these conditions, and telling the user how to view a copy of this License. (Exception: if the
  • Samsung DVR-5100 | User Manual - Page 125
    differ in detail to address new problems or concerns. Each version is software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
  • Samsung DVR-5100 | User Manual - Page 126
    of free software, we are referring to freedom, not price. Our those products. If such problems arise substantially in other under this License, and how to view a copy of this License. If price or no price for each copy that you convey, and you may offer support or warranty protection for a fee.
  • Samsung DVR-5100 | User Manual - Page 127
    model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price support service, warranty, or updates password
  • Samsung DVR-5100 | User Manual - Page 128
    present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number SERVICING, REPAIR OR CORRECTION.
  • Samsung DVR-5100 | User Manual - Page 129
    their terms, reviewing courts shall software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service problems that might be introduced by others. Finally, software
  • Samsung DVR-5100 | User Manual - Page 130
    Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access be able to recompile the application to use the modified definitions.) b) U se a suitable shared library mechanism for linking with the Library. A suitable
  • Samsung DVR-5100 | User Manual - Page 131
    differ in detail to address new problems or concerns. Each version is software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.
  • Samsung DVR-5100 | User Manual - Page 132
    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The licence and
  • Samsung DVR-5100 | User Manual - Page 133
    of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their
  • Samsung DVR-5100 | User Manual - Page 134
  • Samsung DVR-5100 | User Manual - Page 135
    R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
8 CHANNEL/
16 CHANNEL DVR
User Manual
SDS-P5101/SDS-P5100/SDS-P4080