Samsung DW50T6060US/AA User Manual - Page 15

Using your dishwasher, Basic guidelines

Page 15 highlights

Using your dishwasher Using your dishwasher Basic guidelines 1. Open the door and load your dishes (See pages 18 to 19). - Place dishes into the upper and lower racks. - Remove any food remains from the dishes before placing them in the rack(s). - After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the dishes will interfere with them. - Make sure the dishes will not prevent the detergent dispenser from opening. 2. Add detergent to the dispenser (see page 21). - Make sure to use only automatic dishwasher detergent and rinse aid. - Refer to "Using detergent" on page 21 for instructions explaining how to add detergent and rinse aid. 3. Press the POWER button. - When you press the POWER button, the entire display turns on and then the indicator of the most recently finished cycle lights up. - If "Rinse refil" ( ) is illuminated, you should refill the rinse aid dispenser to improve washing and drying performance. 4. Select an appropriate cleaning cycle depending on the soil level of the dishes. (See pages 14 and 29.) - Press the appropriate Cycles button. - When you press a Cycles button, the cycle indicator lights up. 5. Press the START button, and then close the door within 3 seconds. - The dishwasher will start draining after a few seconds, and then start the selected cycle. - Make sure to close the door firmly. If the door is not closed properly, the selected cycle will not start automatically. 6. When the wash cycle is completed. - The light illuminates and the dishwasher sounds a chime. - The dishwasher powers off automatically. CAUTION • If you want to load more dishes or pause the dishwasher while it is already running, make sure to open the door slowly and carefully as there is a possibility of injury from the hot steam inside the dishwasher. • If the door is opened while the dishwasher is running, a safety mechanism is activated and stops the cycle. • To resume operation, press the START button, and then close the door within 3 seconds. • Adding dishes several minutes after the dishwasher starts operating may affect its performance. • If you open the door while the dishwasher is running at high temperature, it will drain the hot water automatically to protect you from scalding. DW4000RM_DW50T6060US_AA_DD81-03054A-00_EN.indd 15 English 15 2020-07-17 오후 2:02:10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

Using your dishwasher
Using your dishwasher
Basic guidelines
1.
Open the door and load your dishes (See pages
18
to
19
).
-
Place dishes into the upper and lower racks.
-
Remove any food remains from the dishes before placing them in the rack(s).
-
After placing the dishes into the racks, rotate the nozzles by hand to check whether
any of the dishes will interfere with them.
-
Make sure the dishes will not prevent the detergent dispenser from opening.
2.
Add detergent to the dispenser (see page
21
).
-
Make sure to use only automatic dishwasher detergent and rinse aid.
- Refer to “
Using detergent
” on page
21
for instructions explaining how to add
detergent and rinse aid.
3.
Press the
POWER
button.
-
When you press the
POWER
button, the entire display turns on and then the
indicator of the most recently finished cycle lights up.
-
If “Rinse refill” (
) is illuminated, you should refill the rinse aid dispenser to improve
washing and drying performance.
4.
Select an appropriate cleaning cycle depending on the soil level of the dishes. (See
pages
14
and
29
.)
- Press the appropriate
Cycles
button.
-
When you press a
Cycles
button, the cycle indicator lights up.
5.
Press the
START
button, and then close the door within 3 seconds.
-
The dishwasher will start draining after a few seconds, and then start the selected
cycle.
-
Make sure to close the door firmly. If the door is not closed properly, the selected
cycle will not start automatically.
6.
When the wash cycle is completed.
-
The light illuminates and the dishwasher sounds a chime.
-
The dishwasher powers off automatically.
CAUTION
If you want to load more dishes or pause the dishwasher while it is already running,
make sure to open the door slowly and carefully as there is a possibility of injury from
the hot steam inside the dishwasher.
If the door is opened while the dishwasher is running, a safety mechanism is activated
and stops the cycle.
To resume operation, press the
START
button, and then close the door within 3 seconds.
Adding dishes several minutes after the dishwasher starts operating may affect its
performance.
If you open the door while the dishwasher is running at high temperature, it will drain
the hot water automatically to protect you from scalding.
English
15
DW4000RM_DW50T6060US_AA_DD81-03054A-00_EN.indd
15
2020-07-17
오후 2:02:10