Samsung DW80K7050 DW80K5050 DW80R5060 DW80R5061 Series User Manual - Page 28
troubleshooting
View all Samsung DW80K7050 DW80K5050 DW80R5060 DW80R5061 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
troubleshooting PROBLEM Leaves glasses with a dim polish. Leaves a yellow or brown film on the inside of the dishwasher. Does not dry dishes well. Has a bad odor. Is too noisy. POSSIBLE CAUSE The water supplied is soft and too much detergent was used. Aluminum dishes were included in the wash load. This is caused by coffee and tea soils. SOLUTION Underload the dishwasher and use a rinse aid to minimize this. Remove the marks on the dishes using a low sensitivity cleaner. Remove the soils using a spot cleaner. There is no rinse aid in the dispenser. Check the dispenser and add rinse aid. Use a liquid type rinse aid. The temperature of the water is low when the dishwasher is running. Connect the water supply line to a hot water supply. Use rinse aid with the Sanitize option. Too many dishes have been loaded. Proper loading of items can affect drying. Load your dishes as recommended. (See page 16.) Glasses and cups with concave bottoms hold water. This water may spill onto other items when unloading. After the cycle finishes, empty the lower rack first and then the upper rack. This will prevent water from dripping from the upper rack onto the dishes in the lower rack. AutoRelease™ Dry mode is not in use. Activate the AutoRelease™ Dry mode. (See page 12.) Water was left over from an incomplete cycle. Insert detergent without loading dishes, and run the Normal cycle to clean the dishwasher. The Drain Hose is obstructed. Contact a qualified service technician to remove any obstruction from the drain hose. The dishwasher is not used daily or soiled dishes are left in unit too long. With the dishwasher empty and no detergent, place a glass with 8 ounces of vinegar upright into the lower rack, and then run a Normal cycle. Sound is generated when the dispenser cover is open and the drain pump is operating in an early stage. This is normal operation. The dishwasher is not level. Ensure the dishwasher is level. Foreign material (a screw, a plastic Contact a qualified service technician to piece) is in the pump chamber. remove foreign material from the pump chamber. There is a 'chopping' sound because a nozzle is bumping against the dishes. Rearrange the dishes. DW7000KM-02025DB-01_EN.indd Sec7:28 English - 28 20196-05-0118 10:47:42