Samsung FPT5084 User Manual (ENGLISH) - Page 43
PC Display, Using Your TV as a Computer (PC) Display, Display Modes - clicking
UPC - 036725250802
View all Samsung FPT5084 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer or Video Card manufacturer.) 1 First, click on Control Panel on the Windows start menu. 2 When the control panel window appears, click on Appearance and Themes and a display dialog-box will appear. 3 When the control panel window appears, click on Display and a display dialog-box will appear. 4 Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution) Optimum: 1920 x 1080 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box. Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture. D-Sub Input Display Mode IBM VESA RESOLUTION 720 X 400 640 X 480 640 X 480 640 X 480 800 X 600 800 X 600 800 X 600 800 X 600 1024 X 768 1024 X 768 1024 X 768 1280 X 1024 1280 X 1024 1600 X 1200 1920 X 1080 Horizontal Frequency(kHz) 31.469 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 63.981 79.986 75.000 66.587 Vertical Frequency(Hz) 70.087 59.940 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 60.020 75.025 60.000 59.934 Pixel Clock Frequency(MHz) 28.322 25.175 31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 108.000 123.000 162.000 138.500 Sync Polarity(H/V) HDMI/DVI Input Display Mode RESOLUTION Horizontal Frequency(kHz) Vertical Frequency(Hz) Pixel Clock Frequency(MHz) Sync Polarity(H/V) IBM 720 X 400 640 X 480 31.469 31.469 70.087 59.940 28.322 25.175 -/+ -/- 800 X 600 37.879 60.317 40.000 +/+ VESA 1024 X 768 1280 X 1024 48.364 63.981 60.000 60.020 65.000 108.000 -/+/+ 1920 X 1080 66.587 59.934 138.500 +/- • The interlace mode is not supported. • The TV operates abnormally if a non-standard video format is selected. • The table above conforms to IBM/VESA regulations and is based on using the PC Input. ➢ • When this TV is used as a PC display, 32-bit color is supported. • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a TV. • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal). • In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or TV panel to enter a VIDEO mode. Also, make sure that the PC is connected. English - 43