Samsung HD860 User Manual (ENGLISH) - Page 14
COMPONENT VIDEO OUT, COMPONENT IN, AUDIO red and white, AUDIO red, and white IN, Progressive Out OFF - hdmi
UPC - 036725608603
View all Samsung HD860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CONNECTIONS Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV. 3 Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen. 4 Set the Video Output to Progressive Out OFF in the Display Setup menu. (See pages 50 to 52) You can use the VIDEO SEL. button to change the Video Output mode. (See page 12) RED BLUE GREEN RED WHITE Audio Cable RED WHITE RED BLUE GREEN Component cable (not included) Note - If Video output is incorrectly set to S-Video with the Component cables connected, the screen will turn red. - If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19) - The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB, Y" depending on the manufacturer. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV. - If you set the HDMI output resolution 720p or 1080i, Video/S-Video and component output cannot be used. ENG-14