Samsung HT-AS600 Quick Guide (easy Manual) (ver.1.0) (English) - Page 13
Setting DRC (Dynamic Range Compression), Test Tone, Dynamic Range Compression
View all Samsung HT-AS600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setting DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. √ MAIN UNIT 1 Press SETUP button. • "SETUP MODE" appears on the display and enters into Setup Mode. 2 Press INPUT button 3 times. • "DRC SETUP" appears on the display. 3 Press SURROUND button to set DRC. • Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN will be selected in turn. To Exit Setup Mode • Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit. "SETUP MODE OFF" appears on the display and exits Setup Mode. Setting DRC • STD : Sets DRC effect to standard. • MAX : Sets DRC effect to maximum. • MIN : Sets DRC effect to minimum. • You can only set this function via the main unit. 23 Test Tone Use test tone to check the speaker connection status or level. To Automatically Output Test Tone √ REMOTE CONTROL 1 Press TEST TONE button. • Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝ S.L ➝ S.W. • During test tone output, press ...† button to adjust the speaker output level from -10 to +10 dB by 1 step. To Stop Test Tone • Press TEST TONE button again. 24 OPERATION