Samsung HT-AS730S User Manual (user Manual) (ver.1.0) (English) - Page 38

SPEAKER SETUP (Continued) Setting the test tone Use the test tone to check the speaker connection status or level. 1. Press SETUP/MENU button. ~ "INPUT" appears on the display and goes into Setup Mode. 2. Press ▲▼ button to select "SPEAKER", and then press the  ENTER. 3. Press ▲▼ button to select "TEST TONE", and then press the ENTER or ▶ button.  4. Press ▲▼ button to select the option you want, and then press the ENTER or ▶ button. ~ AUTO : Test signal will be automatically output as follows; F.L  CEN  S.W F.R  S.R  SBR  SBL S.L.  - During test tone output, press ▲▼ button to adjust the speaker output level from -10 to +10 dB by 1 step. ~ MANU (MANUAL): Enables you to adjust the output level of the speaker manually. 1) Press ◀▶ button to select the speaker you want. Each time you press ◀▶ button, F.L  CEN  S.W F.R  S.R  SBR  SBL S.L will be selected in turn. 2) Press ▲▼ button to set the test tone as you want. You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. Test Tone Output • F.L (front left) : -10 ~ +10dB • CEN (center) : -10 ~ +10dB • S.W (subwoofer) : -10 ~ +10dB • F.R (front right) : -10 ~ +10dB • S.R (surround right) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB • S L (surround left) : -10 ~ +10dB - To stop test tone ~ Press SETUP/MENU or EXIT button once time. "SETUP OFF" appears on the display and test tone stops. 38