Samsung HT-D5300 User Manual (user Manual) (ver.1.0) (English) - Page 27
Connecting the FM Antenna, Wireless Network - model
UPC - 036725617605
View all Samsung HT-D5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
02 Connections Wireless Network You can connect the home theater to your network through a wireless IP sharer (router). 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the product. 2. Set the network options. (See page 38) Broadband service LAN iPod DIGITAL AUDIO IN OPTICAL Wireless IP sharer WIRELESS LAN PC Wireless LAN Adapter (not supplied) Networking with PC for AllShare function (See page 69) ✎ NOTE This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name: WIS09ABGN). - The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for purchasing. You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.) Wireless LAN, by its nature, may cause interference, depending on the use condition (router performance, distance, obstacles, interference by other radio devices, etc). Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported. The home theater supports the following security protocols only: 1) Authentication Mode : WEP, WPAPSK, WPA2PSK 2) Encryption Type : WEP, AES For the AllShare function, a PC must be connected in the network as shown in the figure. Connecting the FM Antenna FM Antenna (supplied) FM ANT 1. Connect the FM antenna supplied to the FM ANTENNA Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. ✎ NOTE This product does not receive AM broadcasts. WIRELESS HT-D5300_XAA_0125.indd 27 27 English 2011-01-25 12:01:48