Samsung HT-E6500W User Manual Ver.1.0 (English) - Page 33

04 Settings K Wireless (General) - Automatic After following Steps 1 to 3 in "Configuring Your Network Connection" on page 31: 1 . Select Start in the Network Settings screen, and then press the E button. The product searches for and then displays a list of the available networks. Network Settings Select your wireless router from the list: iptime23 ELT JSY KT_WLAN_C361 Mirhenge_edu SO070VOIP 1/10 Refresh WPS(PBC) Previous Next Cancel 2 . Select the desired network, and then press the E button. 3 . Select Next, and then press the E button again. 4 . On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing E button. 5 . When done, select Next at the right of the screen. The product verifies the network connection and then connects to the network. | NOTE | \ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem. K Wireless (General) - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. After folloiwng Steps 1 to 3 in "Configuring Your Network Connection" on page 31: 1 . Select Start in the Network Settings screen, and then press the E button. The product searches for and then displays a list of the available networks. 2 . Select the desired network or Add Network, and then press the E button. 3 . Select Next, and then press the E button again. 4 . If you selected a network in Step 2, go to Step 7. If you selected Add Network, go to Step 5. 5 . Enter your wireless network or wireless router's name. • Enter numbers directly using the number buttons on your remote control. • Enter letters by selecting a letter with the buttons, and then pressing the E button. • To display capital letters (or redisplay small letters if capital letters are displayed), select A/a, and then press the E button. • To display symbols and punctuation, select , and then press the E button. To redisplay letters, select , and then press the E button. When done, select Next, and then press the E button. 6 . Select the Security Type, select Next, and then press the E button. 7 . On the Security screen, enter your network's Security Code or Pass Phrase. • Enter numbers directly using the number buttons on your remote control. • Enter letters by selecting a letter with the buttons, and then pressing the E button. 8 . When done, select Next at the right of the screen, and then press the E button. 9 . The Network Status screen appears. The product attempts to verify the network connection and fails. 10 . Select IP Settings on the right of the screen, and press the E button. The IP Settings screen appears. )5&8 JOEE


 English 33 |