Samsung HT-E6500W User Manual Ver.1.0 (English) - Page 55
Anynet+ HDMI-CEC, BD Data Management, Front Display, Speaker Settings, HDMI audio, Audio Return
View all Samsung HT-E6500W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
07 Appendix Anynet+ (HDMI-CEC) • Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. • This function is not available if the HDMI cable does not support CEC. • If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. BD Data Management • In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback. • Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported. We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster read/write speed. • The Resume Play function may not work after you format the storage device. • The total memory available to BD Data Management may differ, depending on the conditions. Front Display • You cannot change the brightness of the button and the VOL +, - button. Speaker Settings Settings • When Speaker Selection is set to TV Speaker, audio is produced through the TV speakers. • Running the Auto Sound Calibration function takes about 3 minutes. • Make sure there is no disc in the product when you run the Auto Sound Calibration function. • If the ASC microphone is disconnected during the Auto Sound Calibration setup, the setup will be canceled. • When the Auto Sound Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode will not work. • If the product is connected to external devices or other components (such as an iPod, AUX, D. IN), the Auto Sound Calibration Setup may not work properly. HDMI audio • When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels. Audio Return Channel • When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available. • Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility problem. • The ARC function is only available if an ARC-compliant TV is connected. Digital Output • Digital Output can be activated when Speaker Selection is set to TV Speaker. )5&8 JOEE English 55 |