Samsung HT-E6500W User Manual Ver.1.0 (English) - Page 34

Settings 11 . Select the IP Mode field, and then set it to Manual. 12 . Use the number keypad on your remote to enter the Network values. Use the buttons on the remote to move from entry field to entry field. | NOTE | \ You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Settings Values." on page 32. 13 . When done, highlight OK, and then press E button. The Network Status screen appears. The product verifies the network connection and then connects to the network. When it is done, highlight OK, and then press E button. K WPS(PBC) One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps: After following Steps 1 to 3 in "Configuring Your Network Connection" on page 31: 1 . Select Start in the Network Settings screen, and then press the E button. Network Settings Select your wireless router from the list: iptime23 ELT JSY KT_WLAN_C361 Mirhenge_edu SO070VOIP 1/10 Refresh WPS(PBC) Previous Next Cancel 2 . Select WPS(PBC), and then press the E button. 3 . Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network. The Network Status screen appears. The product connects to the network after the network connection is verified. | 34 English Wi-Fi Direct The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product and each other using a peer-to-peer network, without a wireless router. 1 . Turn on the Wi-Fi direct device and activate its Wi-Fi Direct function. 2 . In the Home screen, select Settings, and then press the E button. 3 . Select Network, and then press the E button. 4 . Select Wi-Fi Direct, and then press the E button. The Wi-Fi Direct devices that you can connect appear. Wi-Fi Direct DeDviiscpelaNyame : [HTS]E6500W Select your Wi-Fi Direct device to connect to. Audio AndroidXXXXXXX Disconnected Network System Refresh Close Support m Move " Enter ' Return 5 . You have three ways to complete the Wi-Fi connection: • Through the Wi-Fi device. • Through the product using PBC. • Through the product using a PIN. Each is covered below. Through the Wi-Fi Device 1 . On the Wi-Fi device, follow the devices procedure for connecting to another Wi-Fi Direct device. See the device's user manual for instructions. 2 . When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept. 3 . The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. )5&8 JOEE