Samsung HW-C700 User Manual (user Manual) (ver.1.0) (English) - Page 39

ENG ● SETUP SETTING THE TEST TONE Use the test tone to check the speaker connection status or level. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 2. Press the ENTER button to select SETUP ENTER. 3. Press the ▲▼ buttons to select TEST TONE, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to select the option you want, and then press the Æ ENTER or ► button. • AUTO : Test signal will be automatically output as follows; F.L Æ CEN Æ S.W Æ F.R Æ S.R Æ SBR Æ SBL Æ S.L. - During test tone output, press the ▲▼ buttons to adjust the speaker Æ output level from -10 to +10 dB by 1 step. • MANUAL : Enables you to adjust the output level of the speaker manually. 1) Press the ENTER button to select the speaker you want. Æ Each time you press the ENTER button, F.L Æ CEN Æ S.W Æ F.R Æ S.R Æ SBR Æ SBLÆ S.L will be selected in turn. 2) Press the ▲▼ buttons to set the Test Tone mode you want. You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. - Test Tone Output • F.L (front left) : -10 ~ +10dB • F.R (front right) : -10 ~ +10dB • S L (surround left) : -10 ~ +10dB • S.R (surround right) : -10 ~ +10dB • CEN (center) : -10 ~ +10dB • S.W (subwoofer) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB - To stop test tone - • Press the SETUP/MENU button once. SETUP OFF appears on the display and test tone stops. M  In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows : F.L Æ FHL Æ CEN Æ S.W Æ FHR Æ F.R Æ S.R. HW-C700-C770S-C770BS-XAA_0609.in39 39 39 2010-06-09 5:07:36