Samsung HW-S50B/ZA User Manual - Page 37
Software Update
View all Samsung HW-S50B/ZA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
12 SOFTWARE UPDATE Important: After upgrading, keep the original Settings. DC 19V USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) HDMI (ARC) DC 19V USB (5V 0.5A) Micro USB to USB adapter Cable (not supplied) 5. Plug USB into Soudbar and switch to USB source, the software will update automatically and will complete update within 2 minutes. During the update process, the 5 LEDs will start flashing in a loop, and then the 5 LEDs will all be bright white, and then the 5 LEDs will flash in a loop again. When the update is complete, the cyan DIGITAL indicator blinks 3 times, and the soundbar (AOUPDTIIOCAINL)automatically restarts. HDMI (ARC) White moves from left to right and right to left X 1 "Start the software update." 1. Connect a USB memory stick to the USB port on your computer. Important: Make sure there are no music files on the USB memory stick drive. This may cause the firmware update to fail. 2. Go to https://www.samsung.com/us/ support/ downloads/ on your computer select Enter Model Number and enter the model of your Soundbar. Select manuals and downloads and download the latest software file. 3. Save the downloaded software to a USB memory stick and select "Extract Here" to unzip the folder. 4. Turn on the Soundbar and connect the USB memory stick containing the software update to the female port on a Micro USB adapter cable. Connect the cable to the USB port on the Soundbar. LED Indicator ENG - 37 5 LEDs display White White moves from left to right and right to left X 1 Cyan Blinks X3 Software Update Finish "The software update is complete." Red Blinks X3 Software Update Failed "The software update failed."