Samsung LN26C450E1D User Manual (user Manual) (ver.1.0) (English) - Page 17

03 Basic Features P Speaker Select (External Speaker / TV Speaker) POWER A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. ✎✎When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. ✎✎When Speaker Select is set to External Speaker, you should use these settings. xx TV Speaker: Off, External Speaker: On MEDIA.P ✎✎When Speaker Select is set to TV Speaker, you should use these settings. xx TV Speaker: On, External Speaker: On ✎✎If there is no video signal, both speakers will be mute. Clock Mode: Set up the current time manually or automatically. -- Auto: Set the current time automatically using the time from a digital channel. ✎✎ The antenna must be connected in order to set the time automatically. -- Manual: Set the current time manually. ✎✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm. ✎✎ Available only when Clock Mode is set to Manual. ✎✎ You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control. DST (Off / On): Switches the DST(Daylight Saving Time) SPDIF Output SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as an A/V Receiver/Home theater. ■■ Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output function on or off. ✎✎ This function is only available when the Clock Mode is set to Auto. Time Zone: Select your time zone. ✎✎ This function is only available when the Clock Mode is set to Auto. (SPDIF) format from the options PCM or Dolby Digital. ✎✎ By connecting to 5.1ch speakers in a dolby ¦¦ Using the Sleep Timer digital setup, maximize your interactive 3D sound experience. ■■ Audio Delay: Correct audio-video sync problems, when OO MENUm → Setup → Time → Sleep Timer → ENTERE watching TV or video, and when listening to digital audio ■■ output using an external device such as an AV receivSe.rMODE Sleep Timer shuts off the Tt V afPt.eMrOaDpE:reAsuettopmearitoicdally SLEEP (0ms ~ 250ms). of time. (30, 60, 90, 120, 150 and 180 minutes). Sound Reset ✎✎ To cancel the Sleep Timer, select Off. Reset all sound settings to the factory defaults. Setup Menu ¦¦ Setting the Time OO MENUm → Setup → Time → ENTERE ¦¦ Setting the On/Off Time OO MENUm → Setup → Time → Timer 1 → ENTERE ■■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first. Time ✎✎The current time will appear every time you press the INFO button. ■■ Clock: Setting the clock is for using various timer features of the TV. ✎✎ If you disconnect the power cord, you have to set the clock again. On Time ▲ Inactivate ▼ Off Time Inactivate Volume 10 Repeat Once Timer 1 12 00 am 12 Source TV 00 Antenna Air am Channel 3 Sun Mon Tue Wed Thu Fri Sat L Move U Adjust E Enter R Return 17 English