Samsung ML-1610 User Manual (ENGLISH) - Page 20
Cancel button, Cancel, On Line/Error, Toner Save, Printing demo Manual feeding, Source - printer problems
UPC - 635753620825
View all Samsung ML-1610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
LED Description If you press the Cancel button in Ready mode, this LED is on 1 and the Toner Save mode is enabled. If you press this button once again, this LED is off and the Toner Save mode is disabled. If the On Line/Error and Toner Save LEDs blink, your system has some problems. To solve the problem, see "Troubleshooting Error Messages" on page 5.16 Cancel button Function Description Printing demo page In Ready mode, press and hold this button for about 2 seconds until all LEDs blink slowly, and release. Manual feeding Press this button each time you load a sheet of paper in the tray, when you select Manual Feed for Source from your software application. For detailed information, see "Using Manual Feed Mode" on page 3.7. Canceling print job Press this button during printing. The On Line/Error LED blinks while the print job is cleared from both the printer and the computer, and then return to Ready mode. This may take some time depending on the size of the print job. In Manual Feed mode, you can't cancel the print job by pressing this button. For detailed information, see "Using Manual Feed Mode" on page 3.7. Toner Save mode on/off In Ready mode, press this button to turn the Toner Save mode on or off. For detailed information, see Software User's Guide and page 4.5. INTRODUCTION 1.7