Samsung ML-1610 User Manual (ENGLISH) - Page 78

Guidelines for Using Paper For the best result, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges. If you are unsure of what type of paper you are loading (such as, bond or recycled), check the label on the package. The following problems may cause print quality deviations, jamming or even damage to the printer. Symptom Problem with Paper Solution Poor print quality or toner adhesion, problems with feeding Too moist, too rough, too smooth or embossed; faulty paper lot Try another kind of paper, between 100 ~ 250 Sheffield, 4 ~ 5 % moisture content. Dropout, jamming, curl Store paper flat in its Stored improperly moisture-proof wrapping. Increased gray background shading/printer wear Too heavy Use lighter paper, open the rear output tray. Excessive curl problems with feeding Too moist, wrong • Open the rear output grain direction or short-grain construction tray. • Use long-grain paper. 6 Jamming, damage Cutouts or to printer perforations Do not use paper with cutouts or perforations. Problems with feeding Ragged edges Use good quality paper. Notes: • Do not use letterhead paper printed with low-temperature inks, such as those used in some types of thermography. • Do not use raised or embossed letterhead. • The printer uses heat and pressure to fuse toner to the paper. Ensure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (180 °C or 372 °F for 0.1 second). SPECIFICATIONS 6.5