Samsung ML-1640 User Manual - Page 36
Around the toner cartridge, Solving other problems, Paper feeding - specifications
View all Samsung ML-1640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Around the toner cartridge 1. Open the front cover. 3. Gently pull the paper toward you. For ML-2240 Series, if you have installed the dust cover, remove the dust cover before opening the front cover. 2. Pull the toner cartridge out and remove it from the machine. • Do not touch the green surface (or sky blue), the OPC drum, with your hands or any other material. Use the handle on the cartidge to avoid touching this area. • Be careful not to expose the green surface (or sky blue), the OPC drum, into light.This will cause damage to the OPC drum.Cover the toner cartridge's OPC drum with paper to avoid damaging it from the light. • Do not turn the toner cartridge over. 4. Check that there is no other paper in the machine. 5. Reinstall the toner cartridge and close the front cover. Your machine resumes printing the document from failed pages. SOLVING OTHER PROBLEMS The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, call for service. Paper feeding CONDITION SUGGESTED SOLUTIONS Paper is jammed during printing. Clear the paper jam. See page 31. Paper sticks together. • Ensure there is not too much paper in the tray. The tray can hold up to 150 sheets of paper, depending on the thickness of your paper. • Make sure that you are using the correct type of paper. See page 24. • Remove paper from the tray and flex or fan the paper. • Humid conditions may cause some paper to stick together. Multiple sheets of paper do not feed. • Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight. • If multiple sheets have caused a paper jam, clear the paper jam. See page 31. Paper does not feed • Remove any obstructions from inside the into the machine. machine. • Paper has not been loaded correctly. Remove paper from the tray and reload it correctly. • There is too much paper in the tray. Remove excess paper from the tray. • The paper is too thick. Use only paper that meets the specifications required by the machine. See page 19. Troubleshooting_ 33