Samsung ML-5017ND/XAA User Manual (user Manual) (ver.1.01) (English) - Page 143

Installing driver over the network 2. Using a network-connected machine 17 6   Windows 1 Make sure that the machine is connected to the network and powered on. Also, your machine's IP address should have been set (see "Setting IP address" on page 13). If the "Found New Hardware Wizard" appears during the installation procedure, click Cancel to close the window. 2 Insert the supplied software CD into your CD-ROM drive. The software CD should automatically run and an installation window will appear. 3 Select Install Now. When you click the Advanced Installation, you can use the Custom Installation option. The Custom Installation allows you to select the machine's connection and choose individual components to install. Follow the instructions on the window. 4 Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. The program searches for the machine. If your machine is not found on the network or locally, an error message appears. • Check if you want to install the software without connection of the printer. - Check this option to install this program without a machine connected. In this case, the print a test page window will be skipped, and completes the installation. • Search again When you press this button, the firewall notice window appears. - Turn off the firewall and Search again. For Windows operating system, click Start > Control Panel > Windows Firewall, and inactivate this option. - Turn off the firewall from the third party's program beside the operating system. Refer to the manual provided by individual programs.