Samsung ML-5017ND/XAA User Manual (user Manual) (ver.1.01) (English) - Page 163
Disconnecting from a network
View all Samsung ML-5017ND/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Wireless network setup 2. Using a network-connected machine 37 Disconnecting from a network To disconnect the wireless network connection, press the (WPS) button or (Cancel or Stop/Clear) button on the control panel for more than two seconds. • When the Wi-Fi network is in idle mode: The machine is immediately disconnected from the wireless network. • When the Wi-Fi network is being used: While the machine waits until the current job is finished, the light blinks fast on the WPS LED. Then, the wireless network connection is automatically disconnected. 17 Using the WLAN Some models may not support this feature. Before starting, you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 17). 1 Press the (Menu) button on the control panel. 2 Press Network > Wireless > WLAN Settings. 3 Press the OK to select the setup method you want. • Wizard (recommended): In this mode the setup is automatic. Machine will display a list of available network to choose. After a network is chosen then printer will prompt for the corresponding security Key. • Custom: In this mode users can give their own SSID or edit SSID, choose the security manually and apply the settings. • For models that have the touch screen on the control panel, follow the next procedure: a Press Setup from the Main screen. b Press Network > Next > Wireless > WLAN Setting. c Select the setup method you want. • If your machine is connected to the network, you can set the WLAN via SyncThru™ Web Service.