Samsung ML-5515 User Manual Ver.2.01 (English) - Page 41
Installing printer driver, Connecting SyncThru™ Web Service, Manual address configuration
View all Samsung ML-5515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
request. • DHCPv6 Off: Never use DHCPv6 regardless of router request. 6. Press OK. Manual address configuration 1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See "Connecting SyncThru™ Web Service" on page 41). For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go. 2. Click Login on the upper right of the SyncThru™ Web Service website. A log-in page appears. 3. Type in the ID and Password then click Login. If it's your first time logging into SyncThru™ Web Service, type in the below default ID and password. • ID: admin • Password: sec00000 4. When the SyncThru™ Web Service window opens, click Settings > Network Settings. 5. Click TCP/IPv6. 6. Enable the Manual Address in the TCP/IPv6 section. IPv6 Protocol should be enabled. 7. Select the Address / Prefix and click the Add button, then the router prefix will automatically be entered into the address field. Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. "A" is the hexadecimal 0 through 9, A through F.) 8. Click the Apply button. Installing printer driver Driver installation for network printer in IPv6 network environment is same as TCP/IPv4 (See "Installing network connected machine's driver" on page 38). Select TCP/IP Port and when the list of machines are displayed, simply select your machine's IPv6 address. Connecting SyncThru™ Web Service 1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL. 2. Click Go to access the SyncThru™ Web Service. 3. Click Login on the upper right of the SyncThru™ Web Service website. A log-in page appears. 4. Type in the ID and Password then click Login. If it's your first time logging into SyncThru™ Web Service, type in the below default ID and password. • ID: admin • Password: sec00000 5. Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual Address) from Configuration Report. 6. Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701]) Address must be enclosed in '[]' brackets. Network setup_ 41