Samsung NE63A6711SS/AA User Manual - Page 53
Changing the oven light, Troubleshooting
View all Samsung NE63A6711SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Troubleshooting Changing the oven light The oven light is a standard 40-watt appliance bulb. It will come on when the oven door is open. When the oven door is closed, press the pad to turn it on or off. It will not work during a self-cleaning cycle. Remove Replace Glass bulb cover Bulb 1. Make sure the oven and the bulb are cool. 2. Unplug the range or disconnect the power. 3. Turn the glass bulb cover in the back of the oven counterclockwise to remove. 4. Turn the bulb counterclockwise to remove it from its socket. 5. Insert a new 40 watt appliance bulb, and then turn it clockwise to tighten. Replace the bulb cover by turning clockwise. 6. Plug in the range or reconnect the power. CAUTION Before changing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Make sure the oven and the bulb are cool. Troubleshooting Samsung works hard to ensure that you don't have problems with your new electric range. If you run into unexpected trouble, look first for a solution in the tables below. If you're still having trouble after trying the suggested solution, call Samsung at 1-800-SAMSUNG (1-800-726-7864). Installation Problem The range is not level. The appliance must be accessed for servicing and cannot be moved easily. Possible cause Solution The appliance has been installed improperly. • Place the oven rack in the center of the oven. Place a level on the oven rack. Adjust the leveling legs at the base of the range until the oven rack is level. • Insure the floor is level and strong and stable enough to adequately support the range. The floor is sagging or sloping. Contact a carpenter to correct the situation. The kitchen cabinets are not properly aligned and make the range appear to be not level. Insure the cabinets are square and provide sufficient room for installation. The kitchen cabinets are not Contact a builder or square and too close to the installer to make the appliance. appliance accessible. Carpet is interfering with movement of the range. Provide sufficient space so the range can be lifted over the carpet. Troubleshooting English 53