Samsung NP740U3E User Manual Windows 8 Ver.1.2 (English) - Page 77
Installing the TPM program, Method 1, Optional
View all Samsung NP740U3E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Using the TPM Security Device (Optional) Chapter 3. Using the computer 76 4 Select Save to save the changes. 5 When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly. 6 Select Security > TPM Configuration and set the TPM Device item to Enabled. Set the TPM State to Enable & Activate. TPM Device TPM State Security Chip State Enabled Clear Enabled & Activate Clear Enabled & Activate Deactivate & Disable Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc. 7 Select Save to save the changes. 8 The computer automatically restarts. Initialization of the TPM chip has been completed. Now, install the TPM program and register the TPM program. Installing the TPM program You can install the TPM program as follows. Install the program according to the procedures below. This program is only provided for models with Recovery and the TPM function. Method 1 1 Run Recovery and click on System Software. - If your computer does not boot up or if System Software does not display in the Recovery program, use Method 2 to install the TPM program. 2 Click on System Software Installation. 3 The SW Update program will be launched. Select TPM Host SW and click Install Now. If the system software media is supplied with the product, you can install the program by using the system software media (only when supplied.) 4 After the installation, if you click OK, the computer restarts.