Samsung NX58R9421SS/AA User Manual - Page 40
Locked position, English, How to re-install the door, How to remove and re-install the Storage drawer
View all Samsung NX58R9421SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Maintenance How to re-install the door 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentations of the hinge arms into the bottom edges of the hinge slots. The notches in each hinge arm must be fully inserted into the bottoms of each slot. Bottom edge of slot Hinge arm How to remove and re-install the Storage drawer Storage drawer 1. Slide open the drawer until it stops. 2. Locate the roller guide clips on either side. Using both hands, pull down the left clip while lifting the right clip, and then remove the drawer. 3. Clean the drawer in warm, soapy water using a cloth or soft brush. Then, rinse and dry it thoroughly. Indentation 3. Open the door fully. If the door will not open fully, the indentations are not inserted correctly in the bottom edges of each slot. 4. Push the hinge locks up against the front frame of the oven cavity into the locked position. Hinge lock 4. Put the drawer in the roller guides on either side, and then snap the clips into place. Maintenance 5. Close the oven door. Locked position Unlocked position 40 English NX58M9420S_DG68-00905A-07_EN+MES+CFR.indb 40 2019-02-28 12:18:11