Samsung RF263BEAESR User Manual Ver.1.0 (English, French, Spanish) - Page 14

Removing any residual matter inside the water supply line after installing the water filter. 111 Turn ON the main water supply and supply water from water supply line. 222 Run water through the dispenser until the water runs clear (approx. 6 to 7 minutes). This will clean the water supply system and remove air from the lines. 333 Additional flushing may be required in some households. 444 Open the Refrigerator door and make sure there are no water leaks coming from the water filter. The basic temperature and recommended temperatures of the Freezer and Refrigerator Compartments are 0°F and 37°F(or -18°C and 3°C) respectively. If the temperature of the Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually. Controlling the Freezer temperature Be sure to flush the dispenser thoroughly, otherwise water may drip from the dispenser. This means that there is still air in the line. Reverse Osmosis Water Supply IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and 827 kPa). If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa.) If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276 to 414 kPa): •• Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary. •• Allow the storage tank on the reverse osmosis system to refill after heavy usage. •• If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. If you have questions about your water pressure, call a licensed, qualified plumber. controlling the temperature Basic temperature of Freezer and Refrigerator Compartments 14_ operating Recommend Temp (Freezer) : 0°F (or -18°C ) The Freezer temperature can be set between -8°F and 5°F (or between -23°C and -15°C) to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1°F (or 1°C) with each press. See below. Fahrenheit : 0°F ➞ -1°F ➞ -2°F ➞ -3°F ➞ -4°F ➞ -5°F ➞ -6°F ➞ -7°F ➞ -8°F ➞ 5°F ➞ 4°F ➞ 3°F ➞ 2°F ➞ 1°F ➞ 0°F. Centigrade : -18°C ➞ -19°C ➞ -20°C ➞ -21°C ➞ -22°C ➞ -23°C ➞ -15°C ➞ -16°C ➞ -17°C ➞ -18°C. Keep in mind that foods like ice cream may melt at 4°F (or -15.5°C). The temperature display will move sequentially from -8°F to 5°F (or from -23°C to -15°C). Controlling the fridge temperature The fridge temperature can be set between 34°F and 44°F (or between 7°C and 1°C) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1°F (or 1°C) with each press. See below. Fahrenheit : 37°F ➞ 36°F ➞ 35°F ➞ 34°F ➞ 44°F ➞ 43°F ➞ 42°F ➞ 41°F ➞ 40°F ➞ 39°F ➞ 38°F ➞ 37°F. Centigrade : 3°C ➞ 2°C ➞ 1°C ➞ 7°C ➞ 6°C ➞ 5°C ➞ 4°C ➞ 3°C. The temperature control process for the Fridge works just like the Freezer process. Press the DA68-02601A(EN+FR+ES)-0.2.indb 14 2012.3.31 9:49:47 AM